« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Turbocharging the Digger  (Read 4202 times)

0 Members and 1 Guest are viewing this topic.

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,538
  • Bike almost back to the 70's 2015
Re: Turbocharging the Digger
« Reply #25 on: August 27, 2014, 09:51:51 AM »
Aha! 5 base gaskets works.
I asked here when the question belong to a turbo compression build, but also my future project using CB900 DOHC rods that fits a CB750.  They are 1.5mm longer.... 1-2 mm copper base gasket will fix that. Cheap rod upgrade.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,763
Re: Turbocharging the Digger
« Reply #26 on: August 29, 2014, 03:29:18 PM »
any chance of dyno runs though out the process to see gains and help with tuning?
Logged

Offline SOHC Digger

  • I'm not an
  • Expert
  • ****
  • Posts: 1,171
Re: Turbocharging the Digger
« Reply #27 on: August 30, 2014, 12:53:21 PM »
Quote from: jaguar on August 29, 2014, 03:29:18 PM
any chance of dyno runs though out the process to see gains and help with tuning?

Possibly. I guess a pre-turbo dyno run to establish a baseline would be a good idea. I will see if I can find a local shop that can do this.
Logged
Pages: 1 [2]  All   Go Up
« previous next »