« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Copper washers on forks (CB400f)  (Read 6490 times)

0 Members and 1 Guest are viewing this topic.

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,466
  • first 100,000 miles. 1977 CB550F
Re: Copper washers on forks (CB400f)
« Reply #25 on: January 12, 2012, 04:53:54 PM »
Touche'
I forgot about those (pretty rare now?
 I'm liking Harley Davidson brake washer seals for last several years.
 
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,715
Re: Copper washers on forks (CB400f)
« Reply #26 on: January 12, 2012, 05:01:09 PM »
Quote from: jessezm on January 10, 2012, 05:45:55 AM
Does anyone know if the copper sealing washers--the 8mm one on the fork bottoms, and the smaller one for the drain hole--can be replaced with washers from the hardware store, or are they a special size that should be ordered from Honda?  I noticed the 8mm washers are the same on all the 4's but the smaller washers have a different part number for the 400f and are discontinued...

Thanks
Replace them with aluminum washers if possible.
Copper and aluminum sets up the worst corrosion potential.
Logged
Pages: 1 [2]  All   Go Up
« previous next »