« previous next »
Pages: [1]   Go Down

Author Topic: My first 650 ride  (Read 1382 times)

0 Members and 2 Guests are viewing this topic.

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
My first 650 ride
« on: January 22, 2012, 07:56:44 PM »
I finally got this to the point where I could ride in to the end of the street (about 300 yards maybe).  The bike does not seem to like throttle openings past about 1/8 or 1/4.  Some of that issue went away after it warmed up real good.  I took off with it and even in its sputtering state, this is WAY more power than I'm used to.  I came back to the house and put the choke on a little and tried again.  It ran way better after that but still not perfect.  The bike is LOUD, obviously nothing resembling a baffle is in there anywhere.  I'm thinking the exhaust that's on it is going to require rejetting.  Being so loud though, I may just look for another, or at least put a slip on with a baffle in it first before I tear the carbs apart again.
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: My first 650 ride
« Reply #1 on: January 22, 2012, 08:04:08 PM »
is the spark advancer free ?
Logged
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: My first 650 ride
« Reply #2 on: January 22, 2012, 08:11:40 PM »
Quote from: scunny on January 22, 2012, 08:04:08 PM
is the spark advancer free ?

Yeah, I had that completely apart when I was working another issue.  Timing is spot on.
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: My first 650 ride
« Reply #3 on: January 23, 2012, 05:13:41 AM »
Looks like a jardine system.  Someone here was looking for one.  Mine is very quite but the baffle is still in too.
Logged
18 grand and 18 miles dont make you a biker

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,244
  • I love to restore & travel. Keep'em Going Strong !
Re: My first 650 ride
« Reply #4 on: January 23, 2012, 01:26:55 PM »
How's your plug color ? The other fellow on here w/ his CB650 problem(engine missing while at cruising speed) is having a bit of lean running,etc. I think. You could try jetting it up richer...w/ that pipe on there and O.E. jetting.....I believe that they ran lean even w/ stock equipment. With that pipe on there and no baffle it may be starving for fuel and running real hot.
« Last Edit: January 23, 2012, 01:29:12 PM by grcamna2 »
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: My first 650 ride
« Reply #5 on: January 23, 2012, 04:23:39 PM »
Quote from: grcamna2 on January 23, 2012, 01:26:55 PM
With that pipe on there and no baffle it may be starving for fuel and running real hot.

That's what I'm thinking.  I forgot I have a Kerker muffler off my 750, looks like the same standard size (2").  I'll try that before I go any further.  I've been watching F16s thread too.
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: My first 650 ride
« Reply #6 on: January 24, 2012, 03:52:31 AM »
When I got my 650, it had no baffles in the mufflers and it ran like a dog, didn't like large throttle openings and wouldn't pull a cowboy off your sister.  I put some new mufflers on it and it improved it greatly, though I had other issues with it, which included a botched cam chain job, stuck spark advancer, timing way out and cracked carb boots.
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4
Pages: [1]   Go Up
« previous next »