Topic: Its time to build a 836 Turbo

[johno]

http://www.ebay.com.au/sch/i.html?_trksid=p3984.m570.l1313&_nkw=3D+Carbon+Fibre+Vinyl+Wrap+Sheet+400mm+x+2000mm+Car+Sticker+BLACK&_sacat=0&_from=R40

Hi Bill, Have you seen this ?   a little while ago one of the forum members posted a beautifull bike agent orange or something and he had the side covers done in the carbon look, I fell in love with it and brought some  as posted above.  It is amazing how it pulls into every nook and cranny with the ol hair dryer treatment. easy to do mate and I cant tell the difference until you weigh and twist it .

Cheers Johno

[Sam Green Racing]

Johno, ask Billy or Jim what we don't know about Asain't Orange.
The company are now doing a series of videos titled "HOW TO" and "HOW NOT" to do things.
http://www.preachersmotorcyclepromotions.com/index.cfm

Sam.

[Bill/BentON Racing]

Well,I did modify the specs!!   Was/is a really nice bike and guys! Bill

926cc? HUH?

[Sam Green Racing]

 

[Jim F]

All of the Mods are done and its on the trailer back to Davids so he can finish the wiring harness
cut and extended the rear sub frame for the new seat
made some mounting locations to use quick release tabs
lots of support under the seat also
put in some steering stops to keep the clip ons for dinging the tank
moved the tank back 2 inches to keep it off the exhaust side of the turbo (Heat and gas don't mix)
new front break lines
installed the new oil temp system (Daytona)
new covers (Ignition and clutch)
more to follow

[MRieck]

Nice work brother. You'll have that ready for the spring which is good as the weather will be cooler which is always better for the break in. I have to call you about some stuff.

[Jerry Rxman Griffin aka MuthaF'er]

Jim, that looks much more 'accommodating'.

Looking at Preacher's schtick has anyone figured out how he obtained/achieved 926cc in a RC Cobra engine?

[MRieck]

Jim, that looks much more 'accommodating'.

Looking at Preacher's schtick has anyone figured out how he obtained/achieved 926cc in a RC Cobra engine?

The same way people have achieved 1400cc CB's Jerry....their imagination.

[Jerry Rxman Griffin aka MuthaF'er]

Hey but he was on TV AND he's a preacher! 

[Sam Green Racing]

So what, .....I've been on TV and I'm The King of England But.............

Sam.

[Leino]

So what, .....I've been on TV and I'm The King of England But.............

Sam.

I have some pics of your highness, when visiting Finland

[MRieck]

So what, .....I've been on TV and I'm The King of England But.............

Sam.

Just because you sit on a porcelain throne doesn't make you a king sir.

[BLUE71TURBO]

So what, .....I've been on TV and I'm The King of England But.............

Sam.

Just because you sit on a porcelain throne doesn't make you a king sir.

                                     

[BLUE71TURBO]

 JIM,  Your bike is bad a$$ !  I only see 1 problem.....your left foot is gonna get COOKED from that short exhaust pipe location.   

[Bill/BentON Racing]

Jim,very nice.Job well done.....I can't help it,kinda like your left foot will be(WELL DONE)! seriously,better than I imagined.Way cool,bike of the month material!!
Rebuilt other 29's, fired up a few minutes ago.Gotta fine tune,but I think they'll be OK.Bill

[Jim F]

The more I sit on the bike the more I might put some slots in  the flange and move it away
from my foot, although when I cranked it, the exhaust went out at a 45 degrees from the motor
but it is close and will have to address this soon.
or move the rear sets either way

just little things left

Jim

Not sure about bike of the month Bill but its turning in to a black red black type of paint job
thats going to be similar to this F1 car

http://images.planetf1.com/12/03/496x259/Marussia-2012-car_2728687.jpg

[Retro Rocket]

Jim, that looks much more 'accommodating'.

Looking at Preacher's schtick has anyone figured out how he obtained/achieved 926cc in a RC Cobra engine?

The same way people have achieved 1400cc CB's Jerry....their imagination.

With a liberal sprinkling of bullsh1t....

[Jim F]

Jim, that looks much more 'accommodating'.

Looking at Preacher's schtick has anyone figured out how he obtained/achieved 926cc in a RC Cobra engine?

The same way people have achieved 1400cc CB's Jerry....their imagination.

With a liberal sprinkling of bullsh1t....

Very Liberal

[jweeks]

And Preacher's bike is still slower than a Hondamatic driven by a "king". 

                                           Jon Weeks

[Kemp]

Just what front end, wheel and brake combo do you have on this turbo beast. It looks very sanitary and effective.

[Jim F]

Nice work brother. You'll have that ready for the spring which is good as the weather will be cooler which is always better for the break in. I have to call you about some stuff.

Mike call me anytime

[Jim F]

Just what front end, wheel and brake combo do you have on this turbo beast. It looks very sanitary and effective.

The Front end is a GL1000
Rotors are from a RC51 Honda
calipers are ZX6
oh it will stop I promise

[bwaller]

Lookin good Jim.

[MRieck]

Just what front end, wheel and brake combo do you have on this turbo beast. It looks very sanitary and effective.

I know the caliper hangers are Ti.

[Sam Green Racing]

And Preacher's bike is still slower than a Hondamatic driven by a "king". 

                                           Jon Weeks

that sh1ts on a porcelain throne.