« previous next »
Pages: [1]   Go Down

Author Topic: Which barrels?  (Read 1738 times)

0 Members and 1 Guest are viewing this topic.

Offline NickO

  • Enthusiast
  • **
  • Posts: 188
Which barrels?
« on: August 30, 2011, 12:48:43 PM »
Our HiPo 836 engine is using a "K" type cylinder head and "F2" cranckcases.

Which type of cylinder block ("F" or "K") would be best suited to the build? My preference is to go with the F2 barrels as the ones I have are in much better shape, (no broken fins, etc.).

Is there a definitive set of "mods" that are required to make "F2" barrels fit a "K" type head?
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Which barrels?
« Reply #1 on: August 30, 2011, 06:49:09 PM »
 Pay attention to your oil drains, there is a combination that will fit together that will lead to a lot of regret later...
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline NickO

  • Enthusiast
  • **
  • Posts: 188
Re: Which barrels?
« Reply #2 on: February 03, 2012, 03:54:26 PM »
Bump!

Just getting to the point where I need to make a descision.

At the moment I have both F1 and F2 donor barrels "in stock", which will be internally modified so wear is not important, but the F1's are a bit rough cosmetically unlike the F2's which are in nice shape. Or should I get hold of some "K" barrels?

Thanks guys,

Nick
« Last Edit: February 03, 2012, 03:58:43 PM by 62tt »
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Which barrels?
« Reply #3 on: February 03, 2012, 04:18:09 PM »
PM Mike Nick, he should be able to help.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Which barrels?
« Reply #4 on: February 03, 2012, 08:31:31 PM »
Ask Ken at Cycle-X.
Logged

Offline mick7504

  • Old Timer
  • ******
  • Posts: 3,740
Re: Which barrels?
« Reply #5 on: February 03, 2012, 09:13:44 PM »
http://forums.sohc4.net/index.php?topic=369.0

Reply #6 in this thread (Eng FAQ) from Mike should help clear it up.
Logged
If I was you
I'd be worried about me.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: Which barrels?
« Reply #6 on: February 04, 2012, 10:32:05 AM »
I PM'd Nick
Logged
Owner of the "Million Dollar CB"
Pages: [1]   Go Up
« previous next »