« previous next »
Pages: [1]   Go Down

Author Topic: I goofed!  (Read 1006 times)

0 Members and 2 Guests are viewing this topic.

Offline katmol

  • Enthusiast
  • **
  • Posts: 117
I goofed!
« on: January 26, 2012, 01:08:16 PM »
I was cleaning up a very dirty 750A and the cleaner I used on the wheels turned the clearcoat milky. Anyway to fix that with out stripping the clearcoat off?
Logged
'74 CB750K Tracy Project
'76 "Modified" GL1000
'77 CB750A Blue
'77 CB750A Red
'79 CM400A Hondamatic
'81 CM400A Hondamatic

"Gone but not forgoten."
'76 CB750A Muscat Green
'70 CL450 Scrambler
'72 CL350 Scrambler
'75 CB750K Stock
'78 750K Black Dresser

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,688
  • Wish? Did somebody say wish?
Re: I goofed!
« Reply #1 on: January 26, 2012, 01:15:02 PM »
Usually once that kind of damage is done it is permanent until you completely strip it and refinish it.
You have to be careful sometimes with the cleaning methods used on certain parts.
Logged
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Ringo

  • Guest
Re: I goofed!
« Reply #2 on: January 26, 2012, 01:19:34 PM »
Kong or another paint guru will weigh in eventually with definitive info, but I would try some buffing compound in the mean time.  Maybe all you need is to rub off the outer layer of clear...
Logged

Offline katmol

  • Enthusiast
  • **
  • Posts: 117
Re: I goofed!
« Reply #3 on: January 27, 2012, 10:53:59 AM »
OK... now what's the best striper to use on these wheels? Also, should I remove the tires?
Logged
'74 CB750K Tracy Project
'76 "Modified" GL1000
'77 CB750A Blue
'77 CB750A Red
'79 CM400A Hondamatic
'81 CM400A Hondamatic

"Gone but not forgoten."
'76 CB750A Muscat Green
'70 CL450 Scrambler
'72 CL350 Scrambler
'75 CB750K Stock
'78 750K Black Dresser

Offline LokisTyro

  • Full Member
  • *
  • Posts: 53
Re: I goofed!
« Reply #4 on: January 30, 2012, 09:58:11 AM »
Was it Bar Keeper's Friend that you used? It's a really great cleaner for all sorts of stuff but is hell on clears and paint cause of the abrasives in it.
Logged
"Get confident, stupid!" -Phil Hartman as Troy McClure

Offline katmol

  • Enthusiast
  • **
  • Posts: 117
Re: I goofed!
« Reply #5 on: January 30, 2012, 03:06:44 PM »
No, it was an aluminum cleaner and I didn't rinse it good enough.

Quote from: LokisTyro on January 30, 2012, 09:58:11 AM
Was it Bar Keeper's Friend that you used? It's a really great cleaner for all sorts of stuff but is hell on clears and paint cause of the abrasives in it.
Logged
'74 CB750K Tracy Project
'76 "Modified" GL1000
'77 CB750A Blue
'77 CB750A Red
'79 CM400A Hondamatic
'81 CM400A Hondamatic

"Gone but not forgoten."
'76 CB750A Muscat Green
'70 CL450 Scrambler
'72 CL350 Scrambler
'75 CB750K Stock
'78 750K Black Dresser

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,318
  • Saver of unloved motorcycles.
Re: I goofed!
« Reply #6 on: January 30, 2012, 05:27:06 PM »
I'm wondering if you dulled the aluminum rather than a clear coat. There could be a lot of polishing in your future.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.
Pages: [1]   Go Up
« previous next »