Author Topic: K0 parts ? (Read 2587 times)

fire113 · « **on:** January 27, 2012, 04:40:36 PM »

Hi all,

...are these parts K0 ? The seller sold this as K2 stuff.
I am not sure but this parts should be K0 parts or am I wrong ?

Have a good one...Georg

736cc · « **Reply #1 on:** January 27, 2012, 04:46:31 PM »

The centerstand is worth a ton because its off a very early sandcast....

markb · « **Reply #2 on:** January 27, 2012, 04:57:20 PM »

The caliper is K0 too. Got anything you want to sell? The rest of the bike?

fire113 · « **Reply #3 on:** January 27, 2012, 05:33:58 PM »

...thx for the fast reply

Nope! Mark no way

I am not going to sell this parts, just bought them to finish my 2ed K0.

Have a good one...Georg

Roach Carver · « **Reply #4 on:** January 27, 2012, 06:13:08 PM »

I see.the caliper. Whats the difference in the centerstand??

736cc · « **Reply #5 on:** January 27, 2012, 07:43:54 PM »

Quote

Whats the difference in the centerstand??

No tang

Roach Carver · « **Reply #6 on:** January 27, 2012, 07:47:44 PM »

Thanks!

754 · « **Reply #7 on:** January 27, 2012, 09:11:01 PM »

c-stand has the tang, its the BRACE the early dont have ..my #572 was like the pic.
The MC check if it has adjuster for lever position, and birdbath cap... looks KO to me the bolt heads have different knurling as well

fire113 · « **Reply #8 on:** January 28, 2012, 03:21:55 AM »

...I restored a K0 speedo last Year as I did the K0 rebuild.
May be You can help me again, I am sure it is K0 Sandcast but the question is WHEN ? early ? mid ? late ?

Terry in Australia · « **Reply #9 on:** January 28, 2012, 04:20:10 AM »

Oooh, I've got 3 centrestands out in my garage, I'm gonna go see if I'm rich!

Swoop · « **Reply #10 on:** January 28, 2012, 05:14:58 AM »

See if there is a fill line inside the master reservoir....if not ......$$$$$$
Steve

fire113 · « **Reply #11 on:** February 18, 2012, 05:36:39 AM »

...I am unsure again

Is this a K0 MC or is it just a modified K1 MC ?
Inside the master reservoir I can see a 12.

THX...Georg

dhall57 · « **Reply #12 on:** February 18, 2012, 06:15:26 AM »

Good morning fire. It's 9:15 Saturday morning in North Carolina. How is it in Germany? Here's a few pics of my 750K6 and KO m/c. K6 has markings, but KO does not.
Hope this helps. dhall

fire113 · « **Reply #13 on:** February 18, 2012, 06:59:15 AM »

Hi dhall,

...it is getting better here, one week ago we had -20°C and right now we have here +7°C

Here it is ~ 4 PM ringt now.

Hmmm ? I have a an other MC without markings AND without a thread for the adjuster bolt

Are You sure that ALL K0 MC came without markings or only the K0-Sandcast MC came without the markings ?

THX...Georg

dhall57 · « **Reply #14 on:** February 18, 2012, 07:35:06 AM »

My 750KO is a 4/70 date. Makes it a diecast not a sandcast of course. I would say though all the silver m/c are w/o stampings sandcast or diecast, but just don't know for sure.

fire113 · « **Reply #15 on:** February 18, 2012, 07:44:14 AM »

...in the last picture You can see NO MARKINGS but the MC has no threat for the adjuster bolt and as I know there wasn't any K0 MC without the thread for the adjuster bolt, or ?

THX..Georg

736cc · « **Reply #16 on:** February 18, 2012, 04:08:27 PM »

Early sandcast master cylinders didn't have a fluid level line inscribed on insde of reservoir.

fire113 · « **Reply #17 on:** February 19, 2012, 04:33:02 AM »

Quote from: 736cc on February 18, 2012, 04:08:27 PM

Early sandcast master cylinders didn't have a fluid level line inscribed on insde of reservoir.

Hi 736cc,

...yes I know that but what is with the diecast K0 stuff ?

Is this a K0 diecast MC or a modified >K1 MC ?

dhall57 · « **Reply #18 on:** February 19, 2012, 04:54:29 AM »

It's always been my understanding that sandcast-diecast through the entire KO line of 750's, m/c and calipers were unpainted and than the start of the K1 line they were black and stayed this way over the rest of the years of the bike. The above pic has to be from a K1 or later model.

fire113 · « **Reply #19 on:** February 19, 2012, 06:44:00 AM »

Hi dhall,

...Pleas take a look at ebay--> Item number: 150762254149

I don't know whats right or wrong

News:

Author Topic: K0 parts ? (Read 2587 times)

Swoop