« previous next »
Pages: [1]   Go Down

Author Topic: Gas tank trim?  (Read 1368 times)

0 Members and 1 Guest are viewing this topic.

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Gas tank trim?
« on: January 31, 2012, 07:30:00 AM »
Ok so my tank has been cleaned and ready for powdercoating finally. I had to take off that aluminum or cheap tank liner...it basically snapped when trying to pull them off. Do they sell these seperate and if so where? And what is the specific name of these? 
* I guess do I really need them after a custom painting?

Sent from my PC36100 using Tapatalk
« Last Edit: January 31, 2012, 07:34:59 AM by messeduptriple »
Logged

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,279
Re: Gas tank liner ?
« Reply #1 on: January 31, 2012, 07:31:43 AM »
Tank liner or the tank trim on the bottom of the tank?
Logged
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: Gas tank liner ?
« Reply #2 on: January 31, 2012, 07:34:25 AM »
Yea..the tank trim...

Sent from my PC36100 using Tapatalk
Logged

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Gas tank trim?
« Reply #3 on: January 31, 2012, 07:41:42 AM »
Very expensive if you can find OEM. For my 77 K it was over $250.00 plus clips.

What bike? I ordered these from David Silver for the 77/78 tank. Brushed finish but look sharp. Not going to use them.

tt
Logged

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: Gas tank liner ?
« Reply #4 on: January 31, 2012, 07:45:47 AM »
76 550

Sent from my PC36100 using Tapatalk
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: Gas tank trim?
« Reply #5 on: January 31, 2012, 07:50:19 AM »
If your not hung up on stock there are various types of chrome looking door trim that can slip over the lip,or at least on 750 tanks,to give a finished look to that area.
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Gas tank trim?
« Reply #6 on: January 31, 2012, 07:56:18 AM »
Quote from: ekpent on January 31, 2012, 07:50:19 AM
If your not hung up on stock there are various types of chrome looking door trim that can slip over the lip,or at least on 750 tanks,to give a finished look to that area.
Yeah.

To answer your (OP) question, assuming a CB750, if your paint job so allows, you can leave those trim strips off. Bend the tabs back out of the way so they don't show. I had mine removed altogether.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Gas tank liner ?
« Reply #7 on: January 31, 2012, 07:58:20 AM »
Quote from: messeduptriple on January 31, 2012, 07:45:47 AM
76 550

Sent from my PC36100 using Tapatalk

I might have one from a 78 550. If I remember it was not very good. Fresh paint would look good with fresh molding.

I'll dig around and see if I can find it.

tt
Logged

Offline IndyFour

  • Hot Shot
  • ***
  • Posts: 601
Re: Gas tank trim?
« Reply #8 on: January 31, 2012, 08:15:40 AM »
Mine did the same thing when I took off the original....just snapped into pieces.  After my repaint, I found this 1/4" stick-on chrome that works well.  Stuff is cheap and seems to hold up well.  I think it was $15 for 20ft or something like that.  Did the tank, the seat (sticks fine to my aftermarket vinyl seat cover) and then had enough to do the tank again when it was repainted a second time (long story).  While it doesn't cover the tank edge (i.e. wrap around the edge), it fills the space around the bottom and front perfectly and is very flexible.  Like someone mentioned above, you might be able to find that auto door edge stuff that's wide enough to work as well.  Same idea.

I think I found this at Meijer or Walmart.  Probably at the auto parts store as well.


Logged
1974 CB550K
2000 VFR800FIY
__________________
Indianapolis, Indiana

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Gas tank trim?
« Reply #9 on: January 31, 2012, 08:21:11 AM »
The one I have is pretty shot.

tt
Logged
Pages: [1]   Go Up
« previous next »