« previous next »
Pages: [1]   Go Down

Author Topic: Gas tank ? 550  (Read 1164 times)

0 Members and 1 Guest are viewing this topic.

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Gas tank ? 550
« on: February 02, 2012, 07:32:33 AM »
I need to take the cap off for powdercoating. What is the easiest way to get that pin out? Or that rubber circle under the cap..I think I just need to get that out. If I take that pin out what kind of pin is that and how do I get it back in???
76 550
Thanks
Sent from my PC36100 using Tapatalk
Logged

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Gas tank ? 550
« Reply #1 on: February 02, 2012, 07:42:41 AM »
If you look inside the cap behing the gasket you will see four (4) star shaped clips. Use a angled pick and it will work out.

As far as the pin I'll wait for replies as I have wondered about this also.

tt
Logged

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: Gas tank ? 550
« Reply #2 on: February 02, 2012, 07:50:52 AM »
You mean bend them out?? How will I reinstall it...will it be a pain??

Sent from my PC36100 using Tapatalk
Logged

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Gas tank ? 550
« Reply #3 on: February 02, 2012, 08:27:03 AM »
Quote from: messeduptriple on February 02, 2012, 07:50:52 AM
You mean bend them out?? How will I reinstall it...will it be a pain??

Sent from my PC36100 using Tapatalk

There like a spring clamp. they will fight you, trust me. Wedge one up, put a small screw driver in there, wedge another one. I have done two (2). Both fought me but I won.  ;)

tt
Logged

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: Re: Gas tank ? 550
« Reply #4 on: February 02, 2012, 09:50:22 AM »
Quote from: toytuff on February 02, 2012, 08:27:03 AM
Quote from: messeduptriple on February 02, 2012, 07:50:52 AM
You mean bend them out?? How will I reinstall it...will it be a pain??

Sent from my PC36100 using Tapatalk

There like a spring clamp. they will fight you, trust me. Wedge one up, put a small screw driver in there, wedge another one. I have done two (2). Both fought me but I won.  ;)

tt
nice!
Reinstalling??

Sent from my PC36100 using Tapatalk
Logged

Offline mjstone

  • I'm definitly not a
  • Hot Shot
  • ***
  • Posts: 689
Re: Gas tank ? 550
« Reply #5 on: February 02, 2012, 10:00:19 AM »
The  pin is a long rivet.  Some have driven them out, but you have to be careful not to bend the tabs.  Others have carefully drilled them out.  You would have to replace the rivet if you drill it out, but might be able to reuse the rivet if its driven out.  Hondaman offers a stainless bolt and acorn nut kit to replace the rivet.

MJ
Logged
1972 CB500Four (Honda)
1973 CB500Four (Oliver)

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: Gas tank ? 550
« Reply #6 on: February 02, 2012, 03:05:05 PM »
I'm wondering if I just try to take out the rubber part and say f it! ? What does that rubber part do? Will I need to replace it or what's its purpose?? Just curious if I can cut a corner and not replace that.

Sent from my PC36100 using Tapatalk
Logged

Offline mjstone

  • I'm definitly not a
  • Hot Shot
  • ***
  • Posts: 689
Re: Gas tank ? 550
« Reply #7 on: February 02, 2012, 05:29:19 PM »
The rubber part is your caps gasket.  It keeps the gasoline from leaking out of your tank.  You need it and it should be in good condition.  If it is cracked you need to replace it with a new one.  Pry out the part that toytuff told you to, its easy to get out and pops right back in.

MJ
Logged
1972 CB500Four (Honda)
1973 CB500Four (Oliver)

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: Gas tank ? 550
« Reply #8 on: February 02, 2012, 09:31:38 PM »
Got it out! Thanks guys!

Sent from my PC36100 using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »