Author Topic: front end question  (Read 1050 times)

0 Members and 1 Guest are viewing this topic.

newkansan

  • Guest
front end question
« on: May 28, 2006, 11:44:54 AM »
I was wondering how compatable front ends from other bikes are for the cb750's.

Could I put a 2000-2003 gsxr 750 front forks and triple tree on with no problem?

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: front end question
« Reply #1 on: May 28, 2006, 06:48:23 PM »
I haven't done any front end conversions but there have been a number of people who have posted on the subject. Enter "front end swap" in the search bar to find more than a few threads on the topic.
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: front end question
« Reply #2 on: May 28, 2006, 08:40:45 PM »


                    Greg, of ohiocaferacers, has put a GSXR (an earlier model, I think)front end on a CB350
           twin and there are some charts ( shows fork tube sizes and info about the triple tree stem)  on
           his website. He might be able to point you in the right direction. Check him out. I hope that
           helps.  Later on, Bill
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!