« previous next »
Pages: [1]   Go Down

Author Topic: 400f wheels and engine  (Read 693 times)

0 Members and 2 Guests are viewing this topic.

Offline pep62

  • Full Member
  • *
  • Posts: 3
400f wheels and engine
« on: February 11, 2012, 05:59:37 PM »
 I took apart the wheels to clean the spokes. What is the torque specs for the spokes?
Also which cylinder is number one and what is the firing order.
Logged

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: 400f wheels and engine
« Reply #1 on: February 11, 2012, 06:36:22 PM »
First off, welcome.  Plenty of good info here and make sure you download the manual for your bike. 1, 2, 4,3.  1 and 4 are controlled by the left set of points and 2 and 3 by the right. cylinder 1 is the outer left.  I always tighten the spokes by ear, tapping on the spoke with the spoke wrench until they all have the same ring, getting a bit harder as I age ::)...Larry
Logged
Pages: [1]   Go Up
« previous next »