Author Topic: CB550 Shifter seal, block off oil feed?  (Read 5578 times)

0 Members and 1 Guest are viewing this topic.

Offline Elniniomuchachos

  • Hot Shot
  • ***
  • Posts: 295
Re: CB550 Shifter seal, block off oil feed?
« Reply #25 on: February 17, 2012, 10:42:14 PM »
I think I fixed it. I just took about a 50 mile ride and haven't seen any new drips. I put a paper plate under that area to see if any new drips arrive in the morning.


When is the relay? I'd totally be down to ride with everyone through Phoenix.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,997
  • WHAT?no gravy?
Re: CB550 Shifter seal, block off oil feed?
« Reply #26 on: February 18, 2012, 12:14:15 AM »
you only have paper plates because you hate washing up the dishes!

Offline Elniniomuchachos

  • Hot Shot
  • ***
  • Posts: 295
Re: CB550 Shifter seal, block off oil feed?
« Reply #27 on: February 18, 2012, 12:49:53 AM »
Actually paper plates make good targets...

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,997
  • WHAT?no gravy?
Re: CB550 Shifter seal, block off oil feed?
« Reply #28 on: February 18, 2012, 02:26:46 AM »
remind me not to eat at your place then elniniomuchachosionmachaiousmousness,man you got a long tag name.

Offline Elniniomuchachos

  • Hot Shot
  • ***
  • Posts: 295
Re: CB550 Shifter seal, block off oil feed?
« Reply #29 on: February 18, 2012, 02:12:05 PM »
I went out to check out how the bike was holding up this morning. Only one tiny drop of oil. Which is much better than a 2-3 foot wide puddle. Hopefully it will hold for a while.

I also fixed my gas leak I had with the number four carb. last night.  I took the bowl off and noticed there was a crack in the float. I bet this happened when I wrecked last week. So I tossed that float out and took one from a spare set of carbs and now it's good to go. Though I still would like to tap the carb threads to freshen them up and get allen bolts on them. The number four carb only has 2 of the 3 bolts on right now, because one is stripped.

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
Re: CB550 Shifter seal, block off oil feed?
« Reply #30 on: February 18, 2012, 02:59:06 PM »
I got the oil pump back on with the "newer" o rings. two of the leaks are gone, but there's one left. It looks like it's coming from the plate with the three bolts in it. Is there an o ring behind there?

BryanJ sells the "o" ring you need for that cover.  I just got one from him...I am still chasing my leak.  It stopped for about 20 days now is back, tiny little drip (well 2 actually).  Guess I will be replacing "o" rings for the next 30 days until the rally...
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline Elniniomuchachos

  • Hot Shot
  • ***
  • Posts: 295
Re: CB550 Shifter seal, block off oil feed?
« Reply #31 on: February 18, 2012, 04:33:12 PM »
Yeah, I put a little bit of gasket maker around the o rings just to help a little.

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,267
  • Humboldt, AZ
Re: CB550 Shifter seal, block off oil feed?
« Reply #32 on: February 18, 2012, 06:03:17 PM »

When is the relay? I'd totally be down to ride with everyone through Phoenix.
So far, you are the only Phoenix rider to sign up. ???
Here is a link to our team thread:

http://forums.sohc4.net/index.php?topic=101775.0
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline Elniniomuchachos

  • Hot Shot
  • ***
  • Posts: 295
Re: CB550 Shifter seal, block off oil feed?
« Reply #33 on: February 19, 2012, 01:44:28 AM »

When is the relay? I'd totally be down to ride with everyone through Phoenix.
So far, you are the only Phoenix rider to sign up. ???
Here is a link to our team thread:

http://forums.sohc4.net/index.php?topic=101775.0
Hmm. There's got to be more SOHC's in Phoenix...

Offline domer

  • I got a bridge for sale, and it was built by a
  • Expert
  • ****
  • Posts: 902
  • everything is better with a bag of weed!
Re: CB550 Shifter seal, block off oil feed?
« Reply #34 on: February 19, 2012, 09:13:44 AM »
Pm me if you need the oil pump cover oring. I still have a few vitons left.