Author Topic: Honda CB550 CAFF - FINISHED  (Read 5787 times)

0 Members and 1 Guest are viewing this topic.

Offline valvolux

  • Full Member
  • *
  • Posts: 28
Honda CB550 CAFF - FINISHED
« on: January 09, 2012, 07:28:00 PM »
hi, just i thought id share the progress of my custom.
Its been a long protracted affair with lots of false starts, lengthy delays, blown budgets but it coming together quick now so i thought id share with you the results.

The SOHC has been an invaluable source of information, ive hardly had to post a tech question, the search engine always reveals someone who had been in the same boat before. Hugely indebted!

Terry in Australia built the engine for me. If you read this Terry, my apologies ive lost contact with you, ive moved back to perth and i lost ya number. Hope you are well mate, i always enjoy reading your posts & ya sense of humour!

A shout out to Goddfrey Garage, im sure some of his parts will find its way onto this bike. Now if i could just afford his hydraulic clutch kit  ;)

Because of my shift interstate, the last 10% is being finished by Garage Projects here in Perth. Im hoping by posting this thread it will draw attention to their cool, newly established company. Check em out:

http://garageprojectmotorcycles.tumblr.com/

Ive tried to keep it retro looking, but upgraded the engine & suspension without having to do a major front end swap, which (only in my opinion only) wrecks the vintage look.
Suspension: Race tech fork emulators, springs, preload adjustors & good YSS rear shock.
Engine: 61mm pistons, webcam, HD springs, heavy porting & Keihin CR26's
Internals: lithium battery, keyless ignition, dyna 2000, electronic speedo, warning lights












last tear down before completion:



For all the people who notice the firestones, yes they handle like crap i know, so they are no longer part of the build. Running a modern compound.

usual list:

Re-bored from 544cc to 594cc with HA pistons & CB750 rings
26mm Keihin CR smoothbore carburettors & Mikuni push-pull throttle
Powerflow stage 2 ported cylinder head
WebCam 58a hardwelded camshaft & race valve springs
Tsubaki cam chain, tensioner & guide
Race Tech fork emulators/springs, TTR400 preload adjustors, chrome caps
K&N air filters
Custom frame with new tail section to house relocated battery box
Alloy tank with Golan petcock & solo seat
4-2 reverse cone chambered pipes
YSS SS twin shock rear suspension
Disco Volante classic Italian rear sets
Disco Volante clip on bars & anti vibe grips
Halcyon bar end mirror
New front / rear sprockets and Tsubaki 530 gold chain
Billet chain tensioner, rod, yoke nut, tappets
Drilled front rotor with HEL stainless steel lines, brake pads
Motogadget mini electronic speedometer and warning lights
Motogadget m-lock keyless ignition
Motogadget m-unit
Integrated tachometer/headlight bucket
Dyna 2000 electronic ignition and mini 3.0 ohm coils
8 cell lithium battery
Painted fibreglass shorty front fender
Custom “Rising Sun” rear wheel hugger
Chromed rims and triple clamp, polished covers, forks
Aftermarket steering damper
Firestone Tyres

The cafe scene is pretty small, apologies if you have already seen this all covered on another fourm. Should be finished in a couple of months ready for the Jap Bike Show.
Cheers!
« Last Edit: March 28, 2012, 04:36:34 AM by valvolux »
Life's simple. Make choices and don't look back

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Honda Custom
« Reply #1 on: January 09, 2012, 07:58:48 PM »
Quote
For all the people who notice the firestones, yes there handle like crap i know, so they are no longer part of the build. Running a modern compound.

Best move you ever made, that bike needs to be ridden, those tyres would limit that severely.....They are crap. for looks only.... ;)
Nice bike....
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline FrankenFrankenstuff

  • Master
  • *****
  • Posts: 2,396
    • FrankenBike Stuff Store
Re: Honda Custom
« Reply #2 on: January 09, 2012, 08:03:00 PM »
Custom. Nice job.

Offline Kwality

  • Full Member
  • *
  • Posts: 87
Re: Honda CB550 CAFF
« Reply #3 on: January 10, 2012, 12:55:43 AM »
Hey Valvolux - I followed your trials and tribulations over on the Perth Street Bikes site.  Good to see it finally getting finished!  I'll look out for it at the Jap Bike Show (March?)

Leigh

Offline spammasher

  • Full Member
  • *
  • Posts: 71
Re: Honda CB550 CAFF
« Reply #4 on: January 23, 2012, 03:50:24 AM »
I love your bike, it's gotta be one of the best i have seen. I'm not a big fan of coloured frames but yours is the exeption. Well done, Don.

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: Honda CB550 CAFF
« Reply #5 on: January 23, 2012, 04:37:06 AM »
good looking bike. I'm with Mick, get decent tyres and ride that baby.
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: Honda CB550 CAFF
« Reply #6 on: January 23, 2012, 04:39:02 AM »
and any link to the petcock, mine are a bit tired.
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Honda CB550 CAFF
« Reply #7 on: January 23, 2012, 12:20:20 PM »
I love that exhaust. If were going to build a cafe of any  kind, SOHC4, SOHC2 or a thumper that is the muffler I would want on my bike.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline valvolux

  • Full Member
  • *
  • Posts: 28
Re: Honda CB550 CAFF
« Reply #8 on: March 26, 2012, 10:40:49 PM »
its finished, give or take a few minor bits.

you're right, its looks better with the firestones off and the pirelli's on

Life's simple. Make choices and don't look back

Offline OneWheelDrive

  • A journey of 1000 miles starts with your first carb overhaul.
  • Hot Shot
  • ***
  • Posts: 497
Re: Honda CB550 CAFF
« Reply #9 on: March 27, 2012, 10:16:46 AM »
its finished, give or take a few minor bits.

you're right, its looks better with the firestones off and the pirelli's on



I said GODDAMN!
1975 CB550 cafe
1971 CB500 stocker
2008 Ducati Hypermotard 1100S *sold*
1973 CB350F *sold*
1975 CB550K Project "Keeper" *sold*
2010 Ducati Monster S4RS *sold*
1976 CB360T *sold*
1974 CB550K *sold*
1973 CB750K *sold*
1978 CB550K *sold*
2007 Vespa LX150 *sold*

Offline valvolux

  • Full Member
  • *
  • Posts: 28
Re: Honda CB550 CAFF - FINISHED
« Reply #10 on: March 28, 2012, 04:38:57 AM »
haha cheers. Terry must hate me. He always hated cafe bikes! Lets hope ya put that engine together right mate
« Last Edit: March 28, 2012, 04:42:53 AM by valvolux »
Life's simple. Make choices and don't look back

Offline Bluegreen

  • Hot Shot
  • ***
  • Posts: 396
Re: Honda CB550 CAFF - FINISHED
« Reply #11 on: March 31, 2012, 12:58:37 AM »
Looks great !!! I love the frame.

Offline valvolux

  • Full Member
  • *
  • Posts: 28
Re: Honda CB550 CAFF - FINISHED
« Reply #12 on: April 14, 2012, 04:58:46 PM »






Life's simple. Make choices and don't look back