Topic: Dual braKe question

[JohnN]

Does anyone have tricks for removing the sleeve in the caliper at the pipe joint? I need to reverse the location for the right side caliper location and have been unable to do. I tried heat and penetrating oil but it is still stuck.
John

[clive]

Hi mate
            I removed mine with a short bit of welding rod from inside the housing tapping it out through the bleed hole.

[scottly]

I have used a sheet metal screw jammed into the seat, and pried out with needle-nose pliers. Others have used a finishing nail, inserted from inside the caliper bore, so the head catches on the bottom of the seat.

[JohnN]

Thanks- it popped right out using a sheetmetal screw and pry bar!
John