Author Topic: Classic 60's, 70's Upsweep Pipes From CycleX (Read 7428 times)

CBNJ74 · « **on:** February 29, 2012, 09:27:26 AM »

Has anybody had any experience with these pipes? They look like they bolt right on.

http://www.cyclexchange.net/Exhaust%20System%20Page.htm

apostrophe28 · « **Reply #1 on:** February 29, 2012, 07:56:32 PM »

I've been wondering the same Q! I emailed them for any pics/vid/info on them yesterday...no responce as of yet. I'll make sure to post whatever I get back.

CBNJ74 · « **Reply #2 on:** February 29, 2012, 08:14:59 PM »

I called today and the girl who answered said they bolt right on. I examined the picture a little closer and noticed a frame bracket attached but with no hole at the opposite end.

apostrophe28 · « **Reply #3 on:** March 07, 2012, 10:04:32 PM »

still no reply from my email, anyone used these?

CBNJ74 · « **Reply #4 on:** March 08, 2012, 12:51:06 PM »

Update: I just got off the phone with Roxy. There's no centerstand stop on the left side. You would have to weld one up or remove your centerstand all together.

I like my centerstand so I'm out!

As of today according to the site. Straight Are Out Of Stock and All right sides- Out of Stock

apostrophe28 · « **Reply #5 on:** March 08, 2012, 04:43:36 PM »

A center stand stop shouldnt be to hard to fab up...now just the issue of a picture of it on a bike and what it sounds like. Not to mention the fact that they only have upswept left sides ATM

CBNJ74 · « **Reply #6 on:** April 03, 2012, 05:49:37 PM »

Picturing it is easy and the sound should fine. If I were as handy as you with a torch I'd jump all over them.

Sent from my Kindle Fire using Tapatalk

lucky · « **Reply #7 on:** April 03, 2012, 07:47:46 PM »

Which exhausts are you talking about? The link you gave is to all of the exhausts.

apostrophe28 · « **Reply #8 on:** April 03, 2012, 09:13:08 PM »

Quote from: lucky on April 03, 2012, 07:47:46 PM

Which exhausts are you talking about? The link you gave is to all of the exhausts.

about 1/4 down the page "classic 60s 70s mufflers"

Still no one w a vid of how they sound?

HondaMan · « **Reply #9 on:** April 03, 2012, 09:46:52 PM »

Quote from: CBNJ74 on February 29, 2012, 09:27:26 AM

Has anybody had any experience with these pipes? They look like they bolt right on.

http://www.cyclexchange.net/Exhaust%20System%20Page.htm

Those are sweet! My 350F needs some, wonder if they fit...

Duanob · « **Reply #10 on:** April 04, 2012, 08:52:05 AM »

Wouldn't you need 2x1 collectors on each side? There is a place called cone industries that sells all this stuff as well. But I really like the trumpets on the cyclex website.

apostrophe28 · « **Reply #11 on:** April 04, 2012, 05:15:55 PM »

i believe you would need 4-2 collectors (which i have only my mufflers are rotting off)....really waiting for someone to post a vid!

HondaMan · « **Reply #12 on:** April 07, 2012, 11:07:42 PM »

Quote from: Duanob on April 04, 2012, 08:52:05 AM

Wouldn't you need 2x1 collectors on each side? There is a place called cone industries that sells all this stuff as well. But I really like the trumpets on the cyclex website.

Yeah, either 2x1 on each side with an upsweep, or maybe, just maybe...little extensions that would let it be 4 of those pretty things, 2 straight, 2 up?

I'm teasing myself, now...

CBNJ74 · « **Reply #13 on:** April 13, 2012, 09:09:27 AM »

The left and right sides are back in stock. I'm REAL tempted to take a chance on these. I just want to keep my centerstand and I know for a fact that the left side does not have a stop attached.

CBNJ74 · « **Reply #14 on:** May 18, 2012, 05:20:06 AM »

CB750 supply sells center stand stops that mount up to the passenger peg mount. I will most like be pulling the trigger this weekend. I'll keep you posted.

Rigid · « **Reply #15 on:** May 18, 2012, 01:49:03 PM »

Quote from: CBNJ74 on April 13, 2012, 09:09:27 AM

The left and right sides are back in stock. I'm REAL tempted to take a chance on these. I just want to keep my centerstand and I know for a fact that the left side does not have a stop attached.

Get over the center stand thing already. Fab a stop out of steel like a MAC and mount it to your left rear peg. I figure 30 minutes including the satin rustoleum black paint drying.

CBNJ74 · « **Reply #16 on:** May 18, 2012, 03:14:59 PM »

Quote from: Rigid on May 18, 2012, 01:49:03 PM

Quote from: CBNJ74 on April 13, 2012, 09:09:27 AM
The left and right sides are back in stock. I'm REAL tempted to take a chance on these. I just want to keep my centerstand and I know for a fact that the left side does not have a stop attached.

Get over the center stand thing already. Fab a stop out of steel like a MAC and mount it to your left rear peg. I figure 30 minutes including the satin rustoleum black paint drying.

OR I can spend $4 on one that's already cut, drilled and painted and include it with the rest of my items

Pipes are ordered I should have them some time next week.

lucky · « **Reply #17 on:** May 18, 2012, 03:17:11 PM »

Quote from: apostrophe28 on March 07, 2012, 10:04:32 PM

still no reply from my email, anyone used these?

Which ones are you talking about?

The link just takes you to a product page showing links to all of the exhausts.

bert96 · « **Reply #18 on:** May 18, 2012, 03:18:45 PM »

yeah,i would like to know too!!??? which one

Bert

CBNJ74 · « **Reply #19 on:** May 18, 2012, 03:24:17 PM »

Scroll down a little.

http://www.cyclexchange.net/Mufflers%20and%20and%20Accessories%20Page.htm

bikerbart · « **Reply #20 on:** May 18, 2012, 07:04:29 PM »

I really dig em,I have a 4-2 hanging in the garage

lucky · « **Reply #21 on:** May 18, 2012, 08:13:34 PM »

This is what we see.
Which one?

Click on photo to enlarge.

CafeDawg · « **Reply #22 on:** May 18, 2012, 09:18:34 PM »

click mufflers and accessories scroll halfway down and their you is

lucky · « **Reply #23 on:** May 18, 2012, 11:07:44 PM »

Quote from: CafeDawg on May 18, 2012, 09:18:34 PM

click mufflers and accessories scroll halfway down and their you is

Thanks!!!

CBNJ74 · « **Reply #24 on:** May 23, 2012, 10:32:00 AM »

I just tracked them via FedEx. They should be here by Friday so I'll get them mounted this weekend.

Is everyone excited?

News:

Author Topic: Classic 60's, 70's Upsweep Pipes From CycleX (Read 7428 times)