« previous next »
Pages: 1 ... 9 10 [11] 12 13 ... 35   Go Down

Author Topic: brandEn's K4  (Read 179760 times)

0 Members and 5 Guests are viewing this topic.

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #250 on: April 20, 2013, 06:51:37 PM »
Quote from: CB750 Cafe Racer Fan on April 20, 2013, 06:49:26 PM
The motor is looking good!


Thanks!
The head is going to be GM satin black. With the silver metallic powdercoated engine covers its really going to look sweet.
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #251 on: April 20, 2013, 06:57:02 PM »
So after some confusion, an email, then a reply, and a bit of math I figured out my end gaps. Can't say enough good about Mikes machine work. The bores are perfect and the end gaps need no filing.

Pistons = 2.56"
Wiseco recommends .0045" per inch for the top ring which equals .011" gap. Mine is spot on out of the box.
Wiseco recommends .0055" per inch for the 2nd ring which equals .014" gap. Mine is spot on out of the box.

Thanks Mike for making things so easy.
Logged

Offline edhaeuser

  • Hot Shot
  • ***
  • Posts: 321
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #252 on: April 20, 2013, 10:21:10 PM »
Wow.  Looking really good!

Ed
Logged

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,368
  • SOHC4 member # 2605
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #253 on: April 21, 2013, 01:40:31 AM »
That is some bike porn...very nice. David

Quote from: brandEn on April 20, 2013, 06:04:12 PM
So I received my head and cylinders from MRieck and they look great. I already have the cylinders painted and took these pictures before I tape up the head for paint. I installed my APE cylinder studs and started checking ring end gap for my Wiseco 836 kit.


 


































Installed the studs like Mike suggests. Small amount of red loctite and not much torque. Mock up the head and jugs and torque down the nuts letting everything set up for 24 hours.



Logged
David- back in the desert SW!

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,564
  • Big ideas....
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #254 on: April 21, 2013, 05:37:50 AM »
Looks good Branden. I am very happy #1 chamber cleaned up as well as it did....it was pretty corroded. When using the Loctite make sure it does not "bubble up" when istalling the 2 studs that deliver oil to the top end. It will block the main galley feed holes. You can figure out what happens than and I have seen this occur.  I put the Loctite in the threaded hole (using a toothpick) on those 2 studs to prevent it from riding up the stud threads. I blow air through the oil feed holes in the head at the end to make sure everything is clear
Logged
Owner of the "Million Dollar CB"

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #255 on: April 21, 2013, 09:01:27 AM »
Quote from: MRieck on April 21, 2013, 05:37:50 AM
Looks good Branden. I am very happy #1 chamber cleaned up as well as it did....it was pretty corroded. When using the Loctite make sure it does not "bubble up" when istalling the 2 studs that deliver oil to the top end. It will block the main galley feed holes. You can figure out what happens than and I have seen this occur.  I put the Loctite in the threaded hole (using a toothpick) on those 2 studs to prevent it from riding up the stud threads. I blow air through the oil feed holes in the head at the end to make sure everything is clear

Thanks Mike, I learned that lesson the hard way unfortunately on my F3 build.
Still hurts to think about.
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #256 on: April 23, 2013, 12:35:43 AM »
Prepping for paint
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #257 on: April 23, 2013, 12:44:34 AM »
Final coat



Logged

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #258 on: April 23, 2013, 06:42:17 AM »
Branden

You've got one amazing paint shop too.
What paint are you spraying?
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #259 on: April 23, 2013, 07:03:59 AM »
Yea it's pretty good for stuff like this but I wouldn't want to paint a tank in there. It's not enclosed. Anyway my whole engine is shot with VHT engine enamel. Tige has had good success with it so I figured I would give it a go.
Logged

Offline Vinhead1957

  • Expert
  • ****
  • Posts: 1,196
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #260 on: April 23, 2013, 07:41:28 AM »
Sure is going to be a purty motor!
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #261 on: April 23, 2013, 07:43:17 AM »
Quote from: brandEn on April 23, 2013, 07:03:59 AM
Yea it's pretty good for stuff like this but I wouldn't want to paint a tank in there. It's not enclosed. Anyway my whole engine is shot with VHT engine enamel. Tige has had good success with it so I figured I would give it a go.
Damn,  wish I got paid to work on bikes....   Great success with VHT, it's all in the prep and the after bake. 
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #262 on: April 23, 2013, 08:11:05 AM »
Quote from: tweakin on April 23, 2013, 07:43:17 AM
Quote from: brandEn on April 23, 2013, 07:03:59 AM
Yea it's pretty good for stuff like this but I wouldn't want to paint a tank in there. It's not enclosed. Anyway my whole engine is shot with VHT engine enamel. Tige has had good success with it so I figured I would give it a go.
Damn,  wish I got paid to work on bikes....   Great success with VHT, it's all in the prep and the after bake. 

All work was accomplished on my union negotiated break times

 ;)
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #263 on: April 23, 2013, 08:40:01 AM »
Quote from: brandEn on April 23, 2013, 08:11:05 AM
Quote from: tweakin on April 23, 2013, 07:43:17 AM
Quote from: brandEn on April 23, 2013, 07:03:59 AM
Yea it's pretty good for stuff like this but I wouldn't want to paint a tank in there. It's not enclosed. Anyway my whole engine is shot with VHT engine enamel. Tige has had good success with it so I figured I would give it a go.
Damn,  wish I got paid to work on bikes....   Great success with VHT, it's all in the prep and the after bake. 

All work was accomplished on my union negotiated break times

 ;)

Having Installed Infrared heaters for my shop heating I can see how they would be handy for painting. Even when the air is cold the part will heat up to where you can't even touch it.

Nice job, btw.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #264 on: April 23, 2013, 08:06:42 PM »
Just pulled the top end out of the oven. I am very pleased with the color scheme.


Logged

Offline Frankensteins Bride

  • Enthusiast
  • **
  • Posts: 210
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #265 on: April 23, 2013, 08:18:49 PM »
Thats a wonderful colour scheme! I like it :)
Logged
Working on: 78 Cb750k
Waiting for arrival: 73 Cb750

Frankensteins Wolf

Offline edhaeuser

  • Hot Shot
  • ***
  • Posts: 321
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #266 on: April 23, 2013, 08:20:03 PM »
Sexy........
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #267 on: April 23, 2013, 08:25:49 PM »
Great looking engine Branden... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #268 on: April 23, 2013, 08:47:57 PM »
Thanks everyone. Unfortunately the engine build will be on hold while I focus my budget on getting my wheels and tires sorted. Gotta have a roller so I can use my lift for my other two bikes.
« Last Edit: April 23, 2013, 08:50:12 PM by brandEn »
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #269 on: April 23, 2013, 10:07:15 PM »
Sweet-looking engine!!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #270 on: April 24, 2013, 05:49:07 AM »
Where is everyone getting their HD head nuts from?
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #271 on: April 24, 2013, 02:27:09 PM »
Quote from: brandEn on April 24, 2013, 05:49:07 AM
Where is everyone getting their HD head nuts from?

Rob {Voxonda} has some mate, he's just looking into the cheapest way to ship.... ;)

http://forums.sohc4.net/index.php?topic=118848.msg1367012#new

Scroll to the bottom for latest update.... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline iron_worker

  • Master
  • *****
  • Posts: 2,081
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #272 on: April 25, 2013, 07:24:03 AM »
This is where I got my flange nuts:

http://www.dynoman.net/engine/studs.html

IW
Logged

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #273 on: April 25, 2013, 05:07:58 PM »
Quote from: brandEn on April 24, 2013, 05:49:07 AM
Where is everyone getting their HD head nuts from?

I got mine from Mike Reick.
Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: La Flama Blanca aka The K4 - painting the tank... AGAIN.
« Reply #274 on: April 25, 2013, 05:10:43 PM »
Thanks everyone. Voxonda has me covered.

Hey David!
Logged
Pages: 1 ... 9 10 [11] 12 13 ... 35   Go Up
« previous next »