« previous next »
Pages: [1]   Go Down

Author Topic: How to assemble the clutch actuator?  (Read 485 times)

0 Members and 1 Guest are viewing this topic.

Offline 75 super sport

  • Hot Shot
  • ***
  • Posts: 263
How to assemble the clutch actuator?
« on: March 22, 2012, 10:58:19 AM »
I took the clutch cover off of my 1975 cb750f and now when I put it back on there feels like there is no clutch at the handle. The cable just pulls with no friction. Im pretty sure it has everything to do with the actuator. It looks like a pretty straight forward procedure, but obviously I am missing something. Also, I am making sure that ball bearing and the actuator are flush when i put it on. Thanks in advance for the help.
« Last Edit: March 22, 2012, 11:06:48 AM by 75 super sport »
Logged
"Smoke em if ya got em"

Offline steam-powered man

  • Not the eggman, Not the walrus, I am the
  • Hot Shot
  • ***
  • Posts: 591
  • Where are you going? I was going to make Espresso
Re: How to assemble the clutch actuator?
« Reply #1 on: March 22, 2012, 01:16:09 PM »
sorry, but stoopid question.  have you tried the cable adjusting per the manual?   
Logged
searching for a dr350se

Offline 75 super sport

  • Hot Shot
  • ***
  • Posts: 263
Re: How to assemble the clutch actuator?
« Reply #2 on: March 22, 2012, 02:33:04 PM »
no stupid questions here ;).. I did try adjusting by the manual. My clutch lever will not return either, the return spring is in good shape??
Logged
"Smoke em if ya got em"
Pages: [1]   Go Up
« previous next »