« previous next »
Pages: [1]   Go Down

Author Topic: could use a opinion or two  (Read 2262 times)

0 Members and 1 Guest are viewing this topic.

Offline aberle

  • Full Member
  • *
  • Posts: 25
could use a opinion or two
« on: March 23, 2012, 01:50:20 PM »
So im rebuilding my top end, I'm at the honing my cylinders part for my new rings. So i hear its pretty easy to just use a ball hone to get the glaze off and get a nice crosshatch but a local motorcycle shop will do it for 15 dollars a cylinder, so what I'm asking is should i do it myself or pay the pretty cheap price for a professional to do it?
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: could use a opinion or two
« Reply #1 on: March 23, 2012, 02:22:18 PM »
Do you want to ride or learn how the hone cylinders without training?
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline cmonSTART

  • Hot Shot
  • ***
  • Posts: 285
Re: could use a opinion or two
« Reply #2 on: March 23, 2012, 03:46:56 PM »
I don't think it's that difficult, but you do need to get a feel for it regarding the speed of the drill and rhythm of motion to produce the nice 45 degree crosshatch angle.  $15 per hole and you don't have to worry about that.  Personally, I would probably try it myself. 
Logged
1981 GL1100 Interstate
1978 CB750F Project

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: could use a opinion or two
« Reply #3 on: March 23, 2012, 03:52:31 PM »
I'm sure I did it years ago by hand. It doesn't need to be crosshatched, just scuffed to break the glaze. Some fine wet&dry.
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline MasterChief750

  • Detonation
  • Expert
  • ****
  • Posts: 805
Re: could use a opinion or two
« Reply #4 on: March 23, 2012, 04:38:31 PM »
i used a dingle berry ball hone. oil it and the bored and get a nice rythm going in and out ;D break the glaze and check your progress often and dont sit in one spot. keep it oiled and you will be fine
Logged
1978 CB750 K - Project Red Headed Step Child
1976 CB750 K - Drag Bike
Some things i know, others i dont.
I AM THE STIG
Sam is THE STIG
he said i can be STIG3 tho

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: could use a opinion or two
« Reply #5 on: March 24, 2012, 06:51:06 AM »
Before you hone the cylinder walls you need to measure the cylinders top and bottom if you have not done so.
The dingleberry or ball hone only takes a couple passes on each cylinder to get them ready for new rings.  Up an down maybe 10 times each.

You do not need to hone them much. Just a up and down movement in the cylinder as the hone is spinning. Make sure the hone is all the way in the cylinder so the top of the cylinder wall edge does not get all rounded off.
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: could use a opinion or two
« Reply #6 on: March 25, 2012, 06:19:11 AM »
An Autozone or Advanced Auto up there in GR may have a hone that will work on one of their tool loaner programs    ;)
Logged

Offline aberle

  • Full Member
  • *
  • Posts: 25
Re: could use a opinion or two
« Reply #7 on: March 25, 2012, 09:05:09 AM »
What grit should i use  300 -400? And what size hone.
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: could use a opinion or two
« Reply #8 on: March 25, 2012, 05:32:30 PM »
Sorry I can't help but laugh.

Dingleberry Noun:   

    vulgar. A particle of fecal matter attached to the anal hair.
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline MasterChief750

  • Detonation
  • Expert
  • ****
  • Posts: 805
Re: could use a opinion or two
« Reply #9 on: March 25, 2012, 05:44:31 PM »
 ;D
Logged
1978 CB750 K - Project Red Headed Step Child
1976 CB750 K - Drag Bike
Some things i know, others i dont.
I AM THE STIG
Sam is THE STIG
he said i can be STIG3 tho

Offline aberle

  • Full Member
  • *
  • Posts: 25
Re: could use a opinion or two
« Reply #10 on: March 26, 2012, 04:46:00 AM »
Go ahead and laugh I'm a hairy dude and having a messy poop and getting one sucks Haha you know you have been in that situation
Logged
Pages: [1]   Go Up
« previous next »