« previous next »
Pages: [1]   Go Down

Author Topic: Carb supply line - T-fitting Oring  (Read 1248 times)

0 Members and 1 Guest are viewing this topic.

Offline DaveInTexas

  • Enthusiast
  • **
  • Posts: 238
  • 1970 CB750
Carb supply line - T-fitting Oring
« on: June 09, 2006, 12:02:39 AM »
This is the T fitting between my pairs of carbs, where the fuel line attaches. One was leaking and the o-rings are toast.  Nothing any of the local hardware stores or auto supply houses have will fit.

So I guess I will order fr a honda dealer although they sort of looked like ordinary hardware.

Which one has cheapest shipping?  Hate to spend $14,99 on shipping for a 25cent part.
Logged

Offline Raul CB750K1

  • Old Timer
  • ******
  • Posts: 3,881
Re: Carb supply line - T-fitting Oring
« Reply #1 on: June 09, 2006, 12:31:57 AM »
I recall having read in the old forum that somebody found the o-rings on a gardening shop...

Raul
Logged

Offline justfours

  • Full Member
  • *
  • Posts: 35
Re: Carb supply line - T-fitting Oring
« Reply #2 on: June 09, 2006, 12:39:05 AM »
I used o-rings from a local ace hardware. Outside diameter was a little bigger than stock but they have worked well so far. Ill find exact size and post tomorrow
Logged

Offline mic-57

  • Full Member
  • *
  • Posts: 53
Re: Carb supply line - T-fitting Oring
« Reply #3 on: June 09, 2006, 07:44:49 AM »
Now don't beat me up, but I bought an entire set of metric o-rings from Habor-freight for about $9.00 they are the right size and so far no problems.
Logged

WHALEMAN

  • Guest
Re: Carb supply line - T-fitting Oring
« Reply #4 on: June 09, 2006, 08:08:56 AM »
I went to an industrial supply house that had o-rings. They measured them and found one almost exact.
Logged
Pages: [1]   Go Up
« previous next »