here's what I have so far, just got some $$ from selling one of my other bikes, soprogress should start in earnest now...
The start:
3,300 actual miles, many years in the weather....crud everywhere...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/397099_3189325053987_1291662361_3237713_614484233_n.jpg)
got it apart and sold what I didn't need...still have stuff if anyone needs anything...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/426232_3189326654027_1291662361_3237717_1175361260_n.jpg)
down to the nitty...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/426502_3189325734004_1291662361_3237714_1053121296_n.jpg)
trying to make the nitty less gritty
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/401033_3189326974035_1291662361_3237718_301916340_n.jpg)
gathering parts as I come across deals...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/420558_3189327494048_1291662361_3237719_850339297_n.jpg)
was going to paint this after stripping, but now I think I may just clean up and clearcoat...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/419330_3189328174065_1291662361_3237720_2015993829_n.jpg)
fell into another deal on this...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/404585_3189324573975_1291662361_3237712_2135442631_n.jpg)
got these from a fb friend that had them laying around and never used them...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/424823_3189326214016_1291662361_3237715_870711426_n.jpg)
after MUCH scrubbing, stripper and anything else I could find to de-crud, engine is being painted....
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/418333_3189310853632_1291662361_3237711_575789213_n.jpg)
RED!!!!! RED!!!!!
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/427334_3189310173615_1291662361_3237710_390492831_n.jpg)
painting the other stuff...
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/400459_3189309493598_1291662361_3237709_634320958_n.jpg)
This was my original project bike, until the motor let loose while we were tuning it up... so we are putting the front end and the swingarm/rear wheel on the CB for some stopping power
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/421633_3189502898433_1291662361_3237771_1105217898_n.jpg)
cleaned and painted wheels, resurfaced rotors, rebuilt calipers....
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/396309_3190398840831_1291662361_3238159_1180056512_n.jpg)
Next week is when I'm going to be able to start buying what I need to get her back together....