Author Topic: Honducati (Read 97624 times)

Gurp · « **Reply #275 on:** July 10, 2012, 12:22:18 AM »

Start right there. As ride it feel where there is and isnt power check your plugs and go from there.

Terry in Australia · « **Reply #276 on:** July 10, 2012, 12:36:03 AM »

Quote from: Mtmooradian on July 09, 2012, 07:09:19 PM

Ok, little help.... Looking for a good starting point with these carbs.

I'm running a 4to1 with filter pods
77 cb750k
Main 115
Pilot 35
Needle middle clip

Where should I start

Up your main jets from the current 115's to minimum 125. I installed 130's in an F2 with a pod filter setup, and it was running just a tad rich I thought, but the engine was a bit tired too. That'll get the engine running well enough to start and ride, but you may need to fine tune further to suit your pipe. Cheers, Terry.

Mtmooradian · « **Reply #277 on:** July 19, 2012, 07:30:09 AM »

Headers a little tweaked.......

Syscrush · « **Reply #278 on:** July 19, 2012, 07:33:03 AM »

I was gonna bump this thread today to see what you've been up to.

Glad to see some signs of life!

Mtmooradian · « **Reply #279 on:** July 19, 2012, 09:35:21 AM »

I was in Mexico for a week, came home to a bunch of parts....

Syscrush · « **Reply #280 on:** July 19, 2012, 10:02:10 AM »

Pipe looks awesome - what is it?

Mtmooradian · « **Reply #281 on:** July 19, 2012, 10:35:33 AM »

Vance and Hines drag header

Mtmooradian · « **Reply #282 on:** July 19, 2012, 07:04:57 PM »

Tews19 · « **Reply #283 on:** July 19, 2012, 07:06:47 PM »

Man that exhaust really sets the look. Hurry up and finish dude!

Mtmooradian · « **Reply #284 on:** July 19, 2012, 07:26:12 PM »

Tank is in primer, carbs are all fully rebuilt........ It's all the little things...it has to be ready for the 27th.....

knowsnothing · « **Reply #285 on:** July 20, 2012, 06:13:48 AM »

Quote from: Mtmooradian on July 19, 2012, 07:26:12 PM

Tank is in primer, carbs are all fully rebuilt........ It's all the little things...it has to be ready for the 27th.....

Then you better get the pot of coffee ready

Looking great btw

Mtmooradian · « **Reply #286 on:** July 20, 2012, 05:53:08 PM »

Mtmooradian · « **Reply #287 on:** July 22, 2012, 08:09:16 AM »

brandEn · « **Reply #288 on:** July 22, 2012, 08:15:24 AM »

That thing looks #$%*in! Just don't turn right or you will scrape the header

Seriously, do you think there is going to be any clearance issues there? Its always hard to tell from the pictures.

Mtmooradian · « **Reply #289 on:** July 22, 2012, 08:24:08 AM »

I have the room for a bigger wheels with taller tires..... But The lean angle looks ok as of now.... I'm going to pull it off the lift tonight and check some things....

Mtmooradian · « **Reply #290 on:** July 22, 2012, 06:08:31 PM »

With the rebuilt carbs and air box

brandEn · « **Reply #291 on:** July 22, 2012, 06:14:22 PM »

I like it. I hope that header works because it look great!

Mtmooradian · « **Reply #292 on:** July 23, 2012, 03:27:34 PM »

Body work in primer.

Mtmooradian · « **Reply #293 on:** July 23, 2012, 07:10:21 PM »

Paint in the morning

Syscrush · « **Reply #294 on:** July 23, 2012, 08:12:02 PM »

Quote from: Mtmooradian on July 23, 2012, 07:10:21 PM

Paint in the morning

Wow, can't wait!

Mtmooradian · « **Reply #295 on:** July 24, 2012, 06:58:46 AM »

My industrial choke setup

Syscrush · « **Reply #296 on:** July 24, 2012, 07:10:15 AM »

Sexay.

I am really looking forward to seeing this one all painted up and put together.

I'm especially interested in seeing the headstock/backbone area that's opened up by the side profile of that tank.

Mtmooradian · « **Reply #297 on:** July 24, 2012, 05:25:20 PM »

Choke

Mtmooradian · « **Reply #298 on:** July 24, 2012, 09:10:48 PM »

Tanks in white.... Stripes and numbers tomorrow

Mtmooradian · « **Reply #299 on:** July 25, 2012, 03:57:13 PM »

News:

Author Topic: Honducati (Read 97624 times)