Author Topic: Honducati (Read 96831 times)

Mtmooradian · « **Reply #25 on:** May 01, 2012, 08:16:52 pm »

Franken: send it on over!
Your chain issue looks like a fun one. Looks like sectioning the frame might be the way to go. Get a piece of square tubing and cut out a section of the frame, make a tunnel for the chain to go through .

Dyrden · « **Reply #26 on:** May 01, 2012, 08:23:42 pm »

I like the direction youre taking it.

rat racer · « **Reply #27 on:** May 01, 2012, 10:36:29 pm »

cool bike,but I made the first one (honducati) when I was 15yrs old I'm 58 now.It was a 150 dream that I wanted to ride in the dirt with my friends wish I had a picture to post of it .A friend wrecked his 250 desmo and gave the good parts after he recovered,a swingarm and the rear shocks that's it, he really crashed and burned! 80 tooth rear sprocket top speed 35mph. What a wet dream it was couldn't keep the front wheel on the ground.The swingarm bushings cost me 50 bucks from a local machine shop Hell, I only had $5 when the guy finally tracked me down my mother answered the door without any knowledge of my order and he demanded cash now! Thought I'd never see another dollar for my efforts mowing lawns for $5 bucks ea. again It looks good like tosee pics when you finish.

Mtmooradian · « **Reply #28 on:** May 02, 2012, 06:22:46 am »

This is my inspiration, I've had a handful of monsters, and this one is my fav. 1000cc dual spark....

754 · « **Reply #29 on:** May 02, 2012, 08:28:50 am »

%0 bux for swingarm bushings 40 years ago ?? geez that is like300 or more now.. what an A-hole..

Mtmooradian · « **Reply #30 on:** May 02, 2012, 09:21:31 am »

Should I keep the "anti dive" forks or should I ditch them.....?

Mtmooradian · « **Reply #31 on:** May 02, 2012, 09:38:05 pm »

Wire harness is striped, and putting electronics in

Mtmooradian · « **Reply #32 on:** May 02, 2012, 09:40:34 pm »

Brake lines are measured and banjo are bent... Crimping them maybe tomorrow

Mtmooradian · « **Reply #33 on:** May 02, 2012, 09:41:33 pm »

Brake lines

Mtmooradian · « **Reply #34 on:** May 04, 2012, 04:48:02 pm »

Custom made banjos, ran out of the red ends....

Mtmooradian · « **Reply #35 on:** May 04, 2012, 04:49:52 pm »

Anti dive set up, ran out of red ends...

Terry in Australia · « **Reply #36 on:** May 04, 2012, 06:10:58 pm »

Quote from: Mtmooradian on May 02, 2012, 09:21:31 am

Should I keep the "anti dive" forks or should I ditch them.....?

First of all, beautiful work mate, and for once I agree with Lucky, the great work you've done on the swingarm won't hurt anything. I have to say though, I hate those 1980's Kawasaki forks and silly wheels, I guess you used them because they were cheap, but they (in my opinion only) detract from the other great work you're putting in to it.

I think later model conventional forks and readily available modern 17" wheels (or better still, 18" which are a better "fit" on a CB750) would have really set it off, and I think you'll be disappointed with the result if you don't change them, but I really don't mean any offence mate, and I love what you're doing, the engineering side of your build is fantastic! Cheers, Terry.

Mtmooradian · « **Reply #37 on:** May 04, 2012, 06:26:25 pm »

I agree with you. I am getting a set of black rim supermoto 17s though.. I had the swing arm and forks, My plan is to build this bike for under $1000 and in about two months. So with that in mind in trying to use what I have. I'm at around $450 right now so I'm doing pretty well(thats with the bike)The next bike I build will be done right. I'll make my own aluminum cr750 tank and do a better job with the suspension. This one is my learner...

Mtmooradian · « **Reply #38 on:** May 04, 2012, 06:34:20 pm »

And if it wasn't for the little mini fender on these forks I'd probably toss them...

zzpete · « **Reply #39 on:** May 04, 2012, 06:41:23 pm »

I love where this is going. Great work!!

Terry in Australia · « **Reply #40 on:** May 04, 2012, 06:49:35 pm »

No worries mate, and as I said, I love what you're doing. I've never had much to do with anti-dive forks, they came and went quicker than air forks, but if they really work, well that's gotta be a good thing.

Can you buy complete wheeel assemblies for CB750's from Supermoto? I guess you'd have to ensure that whatever wheel/rim combo you choose could handle the weight of a 500 pound bike? Cheers, Terry.

Mtmooradian · « **Reply #41 on:** May 04, 2012, 06:56:45 pm »

I'm going to lace a set of black excels to new style triumph hubs(2000ish) and I'll make whatever adapters I need. I think the bike should be pretty light for a cb....

Mtmooradian · « **Reply #42 on:** May 04, 2012, 06:58:14 pm »

Oh... And thank you terry for the compliments

Terry in Australia · « **Reply #43 on:** May 04, 2012, 07:01:51 pm »

No problem mate, I cringe at some of the "engineering" I see on this site, but credit where it's due, your stuff is excellent. The wheels you're going to build should be great, and I've no doubt you'll adapt them well. Keep up the good work!

scroggins5000 · « **Reply #44 on:** May 04, 2012, 07:02:08 pm »

Cool build, subscribing.

moosh · « **Reply #45 on:** May 05, 2012, 02:05:16 pm »

very cool subscribed as wel

Mtmooradian · « **Reply #46 on:** May 07, 2012, 04:13:44 pm »

So ended up at a car show Sunday....,,, I think I did pretty well, $60.... Has great compression.

Terry in Australia · « **Reply #47 on:** May 08, 2012, 07:00:03 am »

I think it's missing some parts mate, like a frame, wheels, seat, etc? Or are you gonna use it for a starter motor for your 750?

Mtmooradian · « **Reply #48 on:** May 08, 2012, 02:16:56 pm »

Maybe a cb powered snowblower....
I saw a cb at Daytona this year that was wild..... Small twin with a rigid extended drag frame and modern streetbike forks. .... The tank was cut in half and eash side was mounted below the clone of the frame....

Mtmooradian · « **Reply #49 on:** May 09, 2012, 07:18:24 pm »

Headlight with light switch and oil light, plus made some covers for where the old clip ons went

News:

Author Topic: Honducati (Read 96831 times)