« previous next »
Pages: [1]   Go Down

Author Topic: cb750 cam gear slotting  (Read 1328 times)

0 Members and 2 Guests are viewing this topic.

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
cb750 cam gear slotting
« on: April 24, 2012, 01:21:34 PM »
how much do i need to slot in either direction for say 5 degrees advanced?
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
Re: cb750 cam gear slotting
« Reply #1 on: April 24, 2012, 02:25:09 PM »
nevermind........my son gave me idead to trace cam gear over a protractor and find the bolt holes.
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: cb750 cam gear slotting
« Reply #2 on: April 24, 2012, 04:22:24 PM »
As a rule of thunb, 5 degrees on all old Hondas is the dfference between the F and T marks for the ignition timing on the crank, on the cam it would be double.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike
Pages: [1]   Go Up
« previous next »