« previous next »
Pages: [1]   Go Down

Author Topic: can i depress clutch rod by hand??  (Read 1172 times)

0 Members and 1 Guest are viewing this topic.

Offline 1974blaze

  • Enthusiast
  • **
  • Posts: 139
can i depress clutch rod by hand??
« on: May 10, 2012, 03:19:36 PM »
'71 cb350 clutch not engaging.  makes a popping/clicking sound when cable is adjusted properly. 

with the engine off and the cable removed/cover off, should i be able to depress the clutch lifter rod by hand??

i can not, and i think that's a problem? but what problem??

thanks.
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: can i depress clutch rod by hand??
« Reply #1 on: May 10, 2012, 03:28:39 PM »
I wouldn't have thought so, it's impossible to do on the 550 without some sort of lever. Maybe your mechanism is slipping, check the mechanism inside the clutch cover.
« Last Edit: May 10, 2012, 03:31:03 PM by LesterPiglet »
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline 1974blaze

  • Enthusiast
  • **
  • Posts: 139
Re: can i depress clutch rod by hand??
« Reply #2 on: May 10, 2012, 03:29:40 PM »
thanks les.  that's what i was hoping. 

maybe my plates are stuck? bike sat for a while.  i'll follow some of the unsticking threads.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: can i depress clutch rod by hand??
« Reply #3 on: May 10, 2012, 03:48:30 PM »
Quote from: 1974blaze on May 10, 2012, 03:19:36 PM
with the engine off and the cable removed/cover off, should i be able to depress the clutch lifter rod by hand??

Sure, if you can press the rod with about 50-100 pounds of pressure.   ;D

The actuator mechanism and the bar lever supply a mechanical advantage whereby pressure is magnified/traded for distance movement.  Something it the order of 10:1 or more, as an off-hand guess.
Clutch lifter movement 1/10 of an inch.  Bar lever movement 1-2 inches?

Are you confusing clutch engagement (lever released) with disengagement (lever applied)?

Stuck plates, one to another, would be "engaged".
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline 1974blaze

  • Enthusiast
  • **
  • Posts: 139
Re: can i depress clutch rod by hand??
« Reply #4 on: May 10, 2012, 04:21:05 PM »
TT, you are correct, and thats a nice description.  i believe i have got it sorted out, just ran through the gears on center stand.  won't know for sure until i can get out and ride, which will have to wait for ....ahem... tires, handlebars, headlight, grips, throttle, brake rebuild.... whewww.

Logged
Pages: [1]   Go Up
« previous next »