« previous next »
Pages: [1]   Go Down

Author Topic: Honing cylinders  (Read 922 times)

0 Members and 1 Guest are viewing this topic.

Offline 2wheels

  • Hot Shot
  • ***
  • Posts: 511
Honing cylinders
« on: May 11, 2012, 06:53:01 AM »
Is it possible to make the cylinders between .005 and .010 larger just by honing.
I want to avoid boring costs.
Just wondering.
Logged
1970 CB750 K0 (I can't believe I tossed my duck tail seat in the trash 30 years ago)

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Honing cylinders
« Reply #1 on: May 11, 2012, 07:14:41 AM »
Quote from: 2wheels on May 11, 2012, 06:53:01 AM
Is it possible to make the cylinders between .005 and .010 larger just by honing.
I want to avoid boring costs.
Just wondering.
That's probably too far to go with a hone IMO. Also you lose control of the taper in the cylinder, there shouldn't be any.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline boatsdickson

  • Hot Shot
  • ***
  • Posts: 673
  • 1978 836 K8
Re: Honing cylinders
« Reply #2 on: May 11, 2012, 08:39:32 AM »
+1
Logged
"No. We're all our own prisons, we are each all our own wardens and we do our own time. I can't judge anyone else. What other people do is not really my affair unless they approach me with it. Prison's in your mind. Can't you see I'm free"?  Testimonial of Charles Manson

Offline 2wheels

  • Hot Shot
  • ***
  • Posts: 511
Re: Honing cylinders
« Reply #3 on: May 11, 2012, 10:04:32 AM »
Right.  I was thinking 0.010 inch was too much.
But I have never honed before so I appreciate the input.
Logged
1970 CB750 K0 (I can't believe I tossed my duck tail seat in the trash 30 years ago)
Pages: [1]   Go Up
« previous next »