Topic: Is there a reverse-table for Honda part codes?

[Raul CB750K1]

I need some oils seals for the forks of my Sanglas bike. Problem is that Sanglas shut doors two decades ago...

As seals are pretty much standard, I was wondering if there is a way to know a Honda part code -if any- for an oil seal that measures 42 x 52 x 8. While some other parts, as bolts, form the part code depending on the measurements, oil seals are not the same. Can somebody help with that?

Best regards

Raul

[bryanj]

Raul if i get chance this weekend i will try and go to a shop i know and check out the aftermarket books. would you like me to get a set for you if i can as part of what i owe? Email me direct/ Regards Bryan

[dusterdude]

there is an outfit here in the states called tcm,their part number is 42x52x8tc.if you cant find any,let me know ill get you a couple.

[Raul CB750K1]

Thanks a lot Duster. I made a couple of phone calls and found a bearing shop that will have a set for me on thursday. I will post with the result.

They should be just fine, provided that oil seals and bearings are just standard and not brand-related. As long as the quality is good...


Raul

[dusterdude]

im here for ya bro.