Topic: Tool for mixture setting

[lucky]

This is another method for setting the mixture as described in the Clymers workshop manual Section  SIX.  Lucky

Do exactly as it says and use this tool.
It reads to 1 rpm!!!
You will get excellent results.
It is easier with a second person to read the numbers to you.
It works VERY well.
The tool costs about $ 47.00

[timdhawk]

The product web site and some amazon reviews say its not meant for MC applications, only automotive. Have you actually used this yourself on a CB750?

[lucky]

Yes, I used it myself. No problem.

Autos have 4 cylinder engines.

[timdhawk]

Yes, I used it myself. No problem.

Autos have 4 cylinder engines.

Well then, off to the e-store I go! Thanks

[lucky]

On the end of the tool where it clamps onto the spark plug wire there is a white arrow and that arrow is supposed to point towards the spark plug. The instrutions do not tell you that, but it does show a drawing.

Just use #1 or #4 because they are easier to get to.

[lucky]

I wanted add that it works best on the @1 plug wire with DYNA ignition.