Author Topic: Fuel line size  (Read 1487 times)

0 Members and 2 Guests are viewing this topic.

Offline turboboy

  • Full Member
  • *
  • Posts: 18
Fuel line size
« on: June 10, 2012, 05:25:35 PM »
Hi
It's probably been asked before  :-[
What size fuel for CB 350f   is it 5.5 ID

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Fuel line size
« Reply #1 on: June 10, 2012, 09:12:33 PM »
3/16" is tight enough you don't need a clamp. 1/4" needs a clamp.
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Fuel line size
« Reply #2 on: June 10, 2012, 09:14:36 PM »
Hi
It's probably been asked before  :-[
What size fuel for CB 350f   is it 5.5 ID
Yes its 5.5mm. Available from Honda, Yamiya etc. Many make do with the American 3/16 or 1/4. But for a true fit, its 5.5 mm which falls in between.

SUDCO has it too.
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Fuel line size
« Reply #3 on: June 10, 2012, 09:24:37 PM »
Have a look at this thread. Tygon 7/32". http://forums.sohc4.net/index.php?topic=95795.25
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0