Author Topic: sohc finned covers! anyone seen theses (Read 6005 times)

shag nasty · « **on:** June 15, 2012, 10:15:55 PM »

Who made them and what are they worth

points cover

stator cover

Hasenkopf · « **Reply #1 on:** June 15, 2012, 10:18:17 PM »

I think some dude named Terry collects them, they come up on cheese bay sometimes.

CycleRanger · « **Reply #2 on:** June 16, 2012, 06:11:35 AM »

Polished up probably ~$100+ on ebay these days. They seem to be more scarce than the plain finned covers.

jamesb · « **Reply #3 on:** June 16, 2012, 06:16:25 AM »

the last one i seen on ebay went for around $130.00 it was in nice shape.

Geeto67 · « **Reply #4 on:** June 16, 2012, 07:07:21 AM »

I have a set of those for the DOHC, there were Japanese market only kind of piece but more than a few sets made it over here.

Every set I have ever seen has been chrome, and it looks like those were chrome at one point too but most of it peeled off.

754 · « **Reply #5 on:** June 16, 2012, 09:54:26 AM »

I got one side of that set.. I think the quality was not the best..
They are woth more than the shifter on that bike..

spiritof67 · « **Reply #6 on:** June 16, 2012, 12:20:46 PM »

These were unfortunately the bottom level in these covers - there were at least four different other sets where the finning actually matched the same angle as the cylinder fins for all four pieces (clutch cover, points cover, alternator add-on, starter cover). On this set, obviously, they don't. Odd.

Retro Rocket · « **Reply #7 on:** June 16, 2012, 04:06:26 PM »

There was a lot of them made like that spirit, those covers {pictured} can still be bought new in Japan, i can't remember which site i saw them on but when i come across them i will post the link.

Dyrden · « **Reply #8 on:** June 16, 2012, 04:08:05 PM »

Pretty sure theyre on the Yamiya site somewhere. Still being produced.

shag nasty · « **Reply #9 on:** June 17, 2012, 08:59:26 AM »

you can get the points cover off of Yamiya for 532.52 USD but I still have not found another stator cover like this one, if anyone has one can you post pics. It looks like the whole stator cover is cast as one piece

strynboen · « **Reply #10 on:** June 17, 2012, 10:24:22 AM »

uh its not orginal??? :

CycleRanger · « **Reply #11 on:** June 17, 2012, 10:39:48 AM »

Quote from: strynboen on June 17, 2012, 10:24:22 AM

uh its not original??? :

Nope!

Original points covers are just chromed stamped steel.

shag nasty · « **Reply #12 on:** October 01, 2012, 09:22:49 PM »

added a photo of the stator cover, I have seen the points covers but can't find any pics of anyone else having a stator cover

Retro Rocket · « **Reply #13 on:** October 01, 2012, 09:26:13 PM »

Here you go nasty, nice billet finned covers....

http://www.motolanna.com/blog/read_40224/new-item-honda-cb750-billet-engine-covers.html

Stev-o · « **Reply #14 on:** October 01, 2012, 09:27:42 PM »

Quote from: GSX69bun on June 15, 2012, 10:18:17 PM

I think some dude named Terry hoards them!

FTFY

shag nasty · « **Reply #15 on:** October 01, 2012, 09:36:24 PM »

well i need to find terry and see what he is willing to pay

KRONUS0100 · « **Reply #16 on:** October 03, 2012, 08:21:25 AM »

i have one of the points covers and it is cracked at the top mounting screw, i just put a dab or black rtv on the inside and run it as is.

MCRider · « **Reply #17 on:** October 03, 2012, 09:47:34 AM »

Quote from: Retro Rocket on October 01, 2012, 09:26:13 PM

Here you go nasty, nice billet finned covers....

http://www.motolanna.com/blog/read_40224/new-item-honda-cb750-billet-engine-covers.html

Not the same. Looking for the ones with the tapered shoulders and SOHC on them. More rare.

shag nasty · « **Reply #18 on:** October 03, 2012, 09:56:15 AM »

that stator cover must be rare like hens teeth because I have looked all over the net and cant find a pic of another one. I believe am going to get them rechromed and put them on ebay and see what they will go for unless someone is interested in buying them as they are. I think rechromed might fetch upwords of $1000 but I maybe dreaming. lol

Retro Rocket · « **Reply #19 on:** October 03, 2012, 01:23:23 PM »

Quote from: MCRider on October 03, 2012, 09:47:34 AM

Quote from: Retro Rocket on October 01, 2012, 09:26:13 PM
Here you go nasty, nice billet finned covers....

http://www.motolanna.com/blog/read_40224/new-item-honda-cb750-billet-engine-covers.html
Not the same. Looking for the ones with the tapered shoulders and SOHC on them. More rare.

Yeah, i know, just found them recently and thought i would share ...

MCRider · « **Reply #20 on:** October 03, 2012, 01:30:18 PM »

Quote from: Retro Rocket on October 03, 2012, 01:23:23 PM

Quote from: MCRider on October 03, 2012, 09:47:34 AM
Quote from: Retro Rocket on October 01, 2012, 09:26:13 PM
Here you go nasty, nice billet finned covers....

http://www.motolanna.com/blog/read_40224/new-item-honda-cb750-billet-engine-covers.html
Not the same. Looking for the ones with the tapered shoulders and SOHC on them. More rare.

Yeah, i know, just found them recently and thought i would share ...

I see. Thought that might be the case.

Frankly, I like the ones you show better. I have one of the SOHC style for points but not for Alt cov. I can't tell if the one you showed for the clutch cover has the horizontal fins or the tilted forward fins. If they were tilted, I might buy one. Mine is horiz, so I use the SOHC style to match.

I have a tilted point cover, and alt cover. Course you can't see both sides at the same time.

Retro Rocket · « **Reply #21 on:** October 03, 2012, 02:02:33 PM »

It looks like they are tilted on the clutch cover Ron, i was looking at the angle of the fins in relation to the cover holes....i may be wrong...

MCRider · « **Reply #22 on:** October 03, 2012, 02:05:19 PM »

Quote from: Retro Rocket on October 03, 2012, 02:02:33 PM

It looks like they are tilted on the clutch cover Ron, i was looking at the angle of the fins in relation to the cover holes....i may be wrong...

Yeah i think so too. I'll have to print a picture and go out and hold it up to theengine. Or maybe call the place.

In the meantime, to the OPs question, yes they are sorta rare. But looking at eBay and at some practicality, I don't think you could clear the cost of rechroming them.

Brandedone88 · « **Reply #23 on:** October 03, 2012, 03:25:41 PM »

I got a pair of the finned covers, and still trying to find information about them. They are extremely rare. From what I can determine they were made during the 70's by a chopper builder, in california. Let me take a look at a friend's collection of 70's chopper mags and see if I can find the guys ad. I have both the points and the stator cover. The pair that I have did not look like anything like that tho. Yes they did plate them in both gold and chrome during the 70's. As far as value goes the market is a bit soft, considering that there seems to be a flood of cheap motorcycle parts on ebay lately.

News:

Author Topic: sohc finned covers! anyone seen theses (Read 6005 times)