Author Topic: Sources for wire  (Read 1272 times)

0 Members and 1 Guest are viewing this topic.

Offline eigenvector

  • Master
  • *****
  • Posts: 1,949
  • Member of the despondent public
Sources for wire
« on: December 23, 2014, 08:50:06 am »
I have all the solid jacketed wire in the world to choose from - the local hardware store sells very high quality wire on spools to my amazement.  What I cannot find for the life of me is striped wire.

Surely someone makes striped wire - it's not like there are too many options out there.

Does anyone know of a source for striped stranded wire - say 16 AWG that doesn't come from some seedy place in China or doesn't look like a fly by night?

And to answer your obvious question - of course I can use shrink tubing to mark the wire.  I just prefer to do it the 'right' way.
Rob
--------------------------------
2018 HD Softail Heritage
1979 CB750K Limited Edition
1977 CB550K
1984 CB700SC Nighthawk
1983 VF750S Sabre

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Sources for wire
« Reply #1 on: December 23, 2014, 09:04:10 am »
Have you checked with DSS or Z1?
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: Sources for wire
« Reply #2 on: December 23, 2014, 09:42:41 am »
Dime city cycles too. Who knows their supplier. You could also use a spare harness from a member, I will sell you one really cheap.

I would use wire from a car if you have real picknpull places around you
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline Whaleman

  • Hot Shot
  • ***
  • Posts: 552
Re: Sources for wire
« Reply #3 on: December 23, 2014, 09:56:01 am »
http://www.bestboatwire.com/marine-wire/marine-primary-wire

Not striped but a lot of colors. Very good marine wire. All tinned copper. Dan

Offline mrfish2

  • I might be a
  • Hot Shot
  • ***
  • Posts: 679
Re: Sources for wire
« Reply #4 on: December 23, 2014, 10:10:44 am »
http://4into1.com/fuses-wire-things

OEM colored wire for all your electrical needs
1976 CB550K            1979 XS1100
1980 CB650C - Sold

It's a little motor and likes having the tits revved off it.

Offline eigenvector

  • Master
  • *****
  • Posts: 1,949
  • Member of the despondent public
Re: Sources for wire
« Reply #5 on: December 23, 2014, 10:30:52 am »
I'll check out Dime City then.  Thanks.  For some reason I wouldn't have expected them to sell wire.
Rob
--------------------------------
2018 HD Softail Heritage
1979 CB750K Limited Edition
1977 CB550K
1984 CB700SC Nighthawk
1983 VF750S Sabre

Offline Muckinfuss

  • Hot Shot
  • ***
  • Posts: 380
  • "I plan to live forever.....or die trying."
Re: Sources for wire
« Reply #6 on: December 24, 2014, 08:30:56 am »
any of a dozen hot rod supply houses found on line have what you're looking for including fabric wrapped with stripe identification markings.  Here's one seller on ebay that has different stripe wire markings available.   

http://www.ebay.com/itm/like/251219794547?lpid=82

Plan b...go to your local auto salvage yard and buy a gm or ford harness and cut out what you need.  faster, better, cheaper.
« Last Edit: December 24, 2014, 08:35:31 am by Muckinfuss »
1984 Sportster 1000cc XL
1988 Heritage Softail
1974 CB550
1989 Corvette

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: Sources for wire
« Reply #7 on: December 24, 2014, 08:43:52 am »
vintageconections.com     Their site is down at the moment, but I think that is where I got mine.   I use their connectors and they are great.
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline SOHC

  • Full Member
  • *
  • Posts: 60
Re: Sources for wire
« Reply #8 on: December 24, 2014, 01:58:37 pm »
After u find the right wire a nice wrap is key to keeping it all clean
I used a ton of this stuff to cover wire on the mustang i built, its great stuff and it can be heat shrink wrapped on the ends to give a nice clean look rather than that corrugated crap they sell at auto parts stores.
http://www.painlessperformance.com/webcatalog/wloompb
Current:
1979 Honda CB650 (Hardtail Build)
1983 Suzuki GS850L (Fix and Minor Restore)
Old:
1989 Suzuki Katana 600
1978 Honda CB400T "Hawk"
1983 Honda VF750

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,547
  • Big ideas....
Re: Sources for wire
« Reply #9 on: December 26, 2014, 07:17:42 am »
http://www.powersportrider.com/cgi-bin/zcatjpg   That is in the Tucker Rocky catalog which any bike shop should have on hand.
Owner of the "Million Dollar CB"