« previous next »
Pages: [1]   Go Down

Author Topic: Center stand stop  (Read 1605 times)

0 Members and 1 Guest are viewing this topic.

Offline kjdelaney

  • Full Member
  • *
  • Posts: 83
Center stand stop
« on: July 12, 2012, 02:19:13 PM »
What was used to stop the center stand from hitting the rear brake assembly and the chain on a 77 cb750? I cut the tubes  that held the rear passenger foot pegs off. Did that have something to do with it?
Logged
Currently working on a 1977 CB750K

Offline afkrejci90

  • Enthusiast
  • **
  • Posts: 192
Re: Center stand stop
« Reply #1 on: July 12, 2012, 04:39:59 PM »
From my experience on a 78K 750, it was the mufflers.  Found that out when I took them off and the chain ground a groove into one of the pads on the stand.  Unless you use an exhaust similar to the stock exhaust, you will have to fab something to stop it from making contact with your chain.
Logged
'78 CB750K http://forums.sohc4.net/index.php?topic=105327.0
'80 CB750C - Sold
'06 CBR600RR

Offline 74750k4

  • Hot Shot
  • ***
  • Posts: 459
Re: Center stand stop
« Reply #2 on: September 25, 2012, 07:42:56 PM »
Quote from: kjdelaney on July 12, 2012, 02:19:13 PM
What was used to stop the center stand from hitting the rear brake assembly and the chain on a 77 cb750? I cut the tubes  that held the rear passenger foot pegs off. Did that have something to do with it?

I just welded mine back on, from a brilliant PO that cut them off.

Logged

Offline wvshooter

  • Enthusiast
  • **
  • Posts: 132
Re: Center stand stop
« Reply #3 on: September 25, 2012, 08:20:32 PM »
Quote
I just welded mine back on, from a brilliant PO that cut them off

I just cut mine off because the restoration/customization I'm doing renders them unneeded, additional dead weight, not in sync with the bike's new theme, unsightly...

Different strokes for different folks.   

     
Logged

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: Center stand stop
« Reply #4 on: September 26, 2012, 11:22:43 AM »
afkrejci90 is right

It was the muffler that was the stop. If you search centerstand in the google custom search some ideas come up

Most add some tab or something(nut/bolt affair, some 1/8" or so metal tab) that the centerstand contacts. If it's not too beefy of a mount just don't let it slam upwards too hard
Logged
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Center stand stop
« Reply #5 on: September 26, 2012, 11:37:42 AM »
the 4 into 4 exhaust had a bumper on them.
i just went out and snapped this picture.
$6 in parts from home depot.
rubber stopper
bolt/lock nut drilled and mounted through its center.
some odd concrete foundation bracket...
VHT paint.
if you dont have the passenger pegs,  you'll have to fab a stop off the rear brake hub stabilizer shaft or off the pivot of the center stand itself
just do a search for center stand stop.  lots of ideas and pictures.
« Last Edit: September 26, 2012, 11:41:37 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,805
  • Northern Virginia
Re: Center stand stop
« Reply #6 on: September 26, 2012, 02:19:56 PM »
Quote from: afkrejci90 on July 12, 2012, 04:39:59 PM
From my experience on a 78K 750, it was the mufflers.  Found that out when I took them off and the chain ground a groove into one of the pads on the stand.  Unless you use an exhaust similar to the stock exhaust, you will have to fab something to stop it from making contact with your chain.

afkrejci are you really a tailor?
Logged
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650
Pages: [1]   Go Up
« previous next »