« previous next »
Pages: [1]   Go Down

Author Topic: Orig. Footpeg Problem  (Read 1284 times)

0 Members and 2 Guests are viewing this topic.

Offline mronegear

  • Full Member
  • *
  • Posts: 84
  • Honda CB 550 F 1976
Orig. Footpeg Problem
« on: July 16, 2012, 12:33:58 PM »
Hey all!
I ride a cb 550 F (1975) and i want to go back to the original front footpegs. I was riding with raask footpegs so far.
The problem is that the left front peg (shifter side) is mounted by the lower engine mounting bolt through the frame.
If i loosen that bolt to install the left footpeg, the frame realeases a bit and the bolt + footpeg doesnt fit any more by just 2 or 3 millimeter. So there is no way to get the nut back on the bolt with the footpeg.
Is there any way to solve this problem without having to uninstall the exhaust system (4-1) to rope in the frame somehow?
I'm thankful for tips and tricks!
cheers
Logged

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,903
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Orig. Footpeg Problem
« Reply #1 on: July 16, 2012, 08:04:46 PM »
Quote from: mronegear on July 16, 2012, 12:33:58 PM
Hey all!
I ride a cb 550 F (1975) and i want to go back to the original front footpegs. I was riding with raask footpegs so far.
The problem is that the left front peg (shifter side) is mounted by the lower engine mounting bolt through the frame.
If i loosen that bolt to install the left footpeg, the frame realeases a bit and the bolt + footpeg doesnt fit any more by just 2 or 3 millimeter. So there is no way to get the nut back on the bolt with the footpeg.
Is there any way to solve this problem without having to uninstall the exhaust system (4-1) to rope in the frame somehow?
I'm thankful for tips and tricks!
cheers


Unless someone has swapped that frame bolt for a different one, there should be enough length available. Maybe there is a spacer on the other side. or something?
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline luap

  • LAWL
  • Expert
  • ****
  • Posts: 779
Re: Orig. Footpeg Problem
« Reply #2 on: July 16, 2012, 11:25:48 PM »
did you loosen both nuts to be able to pull more threw the side your having problems with with the stocker pegs- should have 7ish threads on either side
Logged
75-550 ffsc sold, 78-550 diamonte sold, 125s grasshopper sold, 76-550 puma sold, 78-550 tracker sold, 74-550 verde diablo Sold, 74-550 Noemani finished trying to sell. 72 500 hartail in the works
www.cb-town.com
"I dont need a bike covered in paint an chrome I know exactally bout how big my coc( is"

Offline mronegear

  • Full Member
  • *
  • Posts: 84
  • Honda CB 550 F 1976
Re: Orig. Footpeg Problem
« Reply #3 on: July 16, 2012, 11:47:24 PM »
There is def no spacer or anything on the other side, only that distance plate inbetween Motor and frame.
In my case there is only 1 nut to loosen, the other one is one with the bolt.
I will check if probably one preowner used a different bolt, maybe from 550K?
There should be normally enough space for the orig. footpeg and this bolt is damn short. Something must been wrong with it.
thanx
Logged

Offline mronegear

  • Full Member
  • *
  • Posts: 84
  • Honda CB 550 F 1976
Re: Orig. Footpeg Problem
« Reply #4 on: July 17, 2012, 12:15:18 AM »
The preowner painted the frame. he might have swiched the upper engine mounting bolt with the lower one?!
Is the upper bolt a little longer? I only need 5mm more lengt to install the peg...
thanks,
Schuster
Logged

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Orig. Footpeg Problem
« Reply #5 on: July 17, 2012, 12:18:41 AM »
I am just finding out that these footpegs seem to be different than the ones on my 550k (working on a 550F now) I am looking for these pegs.
Logged

Offline mronegear

  • Full Member
  • *
  • Posts: 84
  • Honda CB 550 F 1976
Re: Orig. Footpeg Problem
« Reply #6 on: July 17, 2012, 10:08:56 AM »
Ok, today i ordered a new bolt for my bike to check if it will work with this.
And i was lucky, cause there were only 3 original bolts left in stock! I really hope it will work, and will report after
i got it!
cheers,
Frank
Logged

Offline mronegear

  • Full Member
  • *
  • Posts: 84
  • Honda CB 550 F 1976
Re: Orig. Footpeg Problem
« Reply #7 on: July 23, 2012, 02:03:27 PM »
Problem solved!

the new org. bolt is longer than the old one and the footpeg is fitting nicely  ;) ;) ;)
so the preowner took a wrong bolt  >:(

cheers,
Schuster
Logged
Pages: [1]   Go Up
« previous next »