« previous next »
Pages: 1 2 3 [4]   Go Down

Author Topic: CB750 Idle issues  (Read 36771 times)

0 Members and 1 Guest are viewing this topic.

Offline Spanner 1

  • Old Timer
  • ******
  • Posts: 4,092
  • CB 750 K0 ( always thought it was a K1!) + CB750K8
Re: CB750 Idle issues
« Reply #75 on: August 15, 2012, 11:06:38 AM »
I've expressed my opinion about your 30 day thread, that's all..... have a nice day  :)
Logged
If your sure it's a carb problem; it's ignition,
If your sure it's an ignition problem; it's carbs....

Offline brycegp

  • Hot Shot
  • ***
  • Posts: 532
    • 1971 CB750 "Mut-N-Chop" Cafe Project
Re: CB750 Idle issues
« Reply #76 on: August 15, 2012, 12:05:09 PM »
Quote from: lucky on August 13, 2012, 09:35:40 PM

Getting the carbs back on. This is my method.
Put a tiny bit of Vasoline speared on the mating parts.
Get on the right side of the bike and tie the carbs up with zip tie to take the weight off.
Then push the #4 carb into position all the way and tighten the clamp.
Then go to the left side of the bike and push the #1 carb into position all the way.
Tighten the clamp.
The two middle carbs should take care of themselves.

Thanks, Lucky!  This method worked nicely...
Logged
1971 CB750K/F - El Toro
El Toro Build Thread - http://forums.sohc4.net/index.php?topic=73552.0

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: CB750 Idle issues
« Reply #77 on: August 15, 2012, 12:34:38 PM »
Quote from: brycegp on August 15, 2012, 12:05:09 PM
Quote from: lucky on August 13, 2012, 09:35:40 PM

Getting the carbs back on. This is my method.
Put a tiny bit of Vasoline speared on the mating parts.
Get on the right side of the bike and tie the carbs up with zip tie to take the weight off.
Then push the #4 carb into position all the way and tighten the clamp.
Then go to the left side of the bike and push the #1 carb into position all the way.
Tighten the clamp.
The two middle carbs should take care of themselves.

Thanks, Lucky!  This method worked nicely...

You are welcome Brycegp!
Logged

Offline brycegp

  • Hot Shot
  • ***
  • Posts: 532
    • 1971 CB750 "Mut-N-Chop" Cafe Project
Re: CB750 Idle issues
« Reply #78 on: August 15, 2012, 08:07:16 PM »
Quote from: Spanner 1 on August 15, 2012, 11:06:38 AM
I've expressed my opinion about your 30 day thread, that's all..... have a nice day  :)

Logged
1971 CB750K/F - El Toro
El Toro Build Thread - http://forums.sohc4.net/index.php?topic=73552.0

Offline persson-johan@hotmail.com

  • Enthusiast
  • **
  • Posts: 136
Re: CB750 Idle issues
« Reply #79 on: April 29, 2016, 02:42:47 AM »
Were did you get that nice brass screw with the hose adapter that you can see on the first pic?
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: CB750 Idle issues
« Reply #80 on: April 29, 2016, 11:16:16 AM »
Quote from: lucky on April 29, 2016, 11:10:07 AM
I hope I am not wasting my time again.


lol...The OP has not been on in nearly 2 years.  Pretty sure he's figured it out or moved on ::)
Last Active: September 20, 2014, 06:15:14 PM
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: CB750 Idle issues
« Reply #81 on: April 29, 2016, 11:17:40 AM »
Thanks Flybox1!! You are quick!!!
Logged

Offline bomorr

  • Enthusiast
  • **
  • Posts: 106
    • sohc/4
Re: CB750 Idle issues
« Reply #82 on: October 26, 2016, 07:40:25 PM »
and here I was reading the entire 9 pages trying to see if anyone had info on the adapter this guy used on his float bowls... lol I won't hold my breath

Sent from my SM-G925V using Tapatalk

Logged
Pages: 1 2 3 [4]   Go Up
« previous next »