« previous next »
Pages: [1]   Go Down

Author Topic: OEM style replacement master cylinder - matching clutch lever FOUND  (Read 1880 times)

0 Members and 1 Guest are viewing this topic.

Offline Chachi

  • Hot Shot
  • ***
  • Posts: 713
OEM style replacement master cylinder - matching clutch lever FOUND
« on: July 23, 2012, 07:54:20 PM »
I have a new OEM style master cylinder. It works best with the lever that came with it vs. my stock lever. However the lever that came with it doesn't match my stock clutch lever. After much research I determined that the manufacturer of the master cylinder used a Bikemaster lever. Bikemaster makes a corresponding clutch lever. I got one off ebay and now my levers match. I figured I'd post in case anyone else was annoyed by this.

The master cylinders are good. They're sold by DSS, Carpy, some ebay sellers, etc.

Bikemaster part numbers:
Brake lever - 07-0405
Clutch lever - 07-1128
Logged
73 CB750 K3
72 CB500 K1 - Sold
75 MR50 Elsinore K1

Offline Chachi

  • Hot Shot
  • ***
  • Posts: 713
Re: OEM style replacement master cylinder - matching clutch lever FOUND
« Reply #1 on: July 23, 2012, 07:56:51 PM »
Logged
73 CB750 K3
72 CB500 K1 - Sold
75 MR50 Elsinore K1

Offline ChuckG750f1

  • Not your average, everyday, run-of-the-mill
  • Hot Shot
  • ***
  • Posts: 353
Re: OEM style replacement master cylinder - matching clutch lever FOUND
« Reply #2 on: July 24, 2012, 03:25:46 AM »
Good to know!  Thanks.
Logged
Life is hard; it's harder if you're stupid.
- John Wayne

1976 CB750 f1
1995 HD Softail Custom

Offline KrazaNator

  • Full Member
  • *
  • Posts: 8
  • 220...221 whatever it takes...
    • http://hondacaferacer.blogspot.com
Re: OEM style replacement master cylinder - matching clutch lever FOUND
« Reply #3 on: October 18, 2012, 05:39:03 PM »
I just picked one up for my 78 CB400T II on http://www.cmsnl.com/. Looks like my original was replaced with a 79 MC for the same bike. By the time I bought the repaid kit to fix it, it seemed more reasonable to just replace it with this cool looking MC. They say it's basically an exact match for what was originally on the bike.
Logged
Sam K.
------------------
1978 Honda CB400T II Hawkhttp://forums.sohc4.net/gallery/32021-210113143722.jpeg

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,595
  • Bike almost back to the 70's 2015
Re: OEM style replacement master cylinder - matching clutch lever FOUND
« Reply #4 on: September 12, 2013, 12:25:53 PM »
Is this Master Cylinder Ok? Still working....?
It cost not so much more than a repair kit for the old sun burned Honda original MC.
I found it close to me in Europe
http://www.wemoto.com/bikes/honda/cb_750_k6/77/picture/front_brake_master_cylinder/
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967
Pages: [1]   Go Up
« previous next »