Ha ha, well I'm pissed off with crawling around on my concrete floor all day working on my Goldwing.
I've got a hydraulic bike lift thingie, but I stuffed up and forgot to put the locking bar in place when I was doing up Kens K1, so the poor hydraulic ram had 500 pounds of bike pushing down on it for a couple of weeks before it gave up and started spewing hydraulic fluid out, so I've dragged it out in the driveway to save space in the garage.
Anyway, so far today I've replaced the rear disc and pads, regreased the drive splines and drained and refilled the final drive oil. I re-installed the exhaust system with new seals and gaskets, and took it for it's first ride around the block. Man is this thing smooooooooth! I stripped the front forks in preparation for new seals, and tomorrow I'll do the forks seals and replace the discs and pads, as the discs are "Paper-thin" after 94,000 miles.
So anyway, after 6 or 7 hours of crawling around my garage floor, and putting a hole in my favourite oil drain pan, I was filthy, tired, and well pissed off. I love working on bikes, but I think I might be getting a little old for this crap.............