« previous next »
Pages: [1]   Go Down

Author Topic: 78K Valvetrain  (Read 561 times)

0 Members and 1 Guest are viewing this topic.

Offline afkrejci90

  • Enthusiast
  • **
  • Posts: 192
78K Valvetrain
« on: August 17, 2012, 07:31:29 AM »
I am converting to 5mm valves.  Is this everything I need http://valvetrain.kpmivalvetrain.com/category/-cb-750-sohc-1969-to-1976-5-00mm-conversion-system , or will I need anything to special for a 78 K head?  On another kit I needed a retainer conversion for this head.  Also are there any oversize intakes with 5mm stems?
Logged
'78 CB750K http://forums.sohc4.net/index.php?topic=105327.0
'80 CB750C - Sold
'06 CBR600RR

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: 78K Valvetrain
« Reply #1 on: August 17, 2012, 08:03:08 AM »
You need the whole kit which includes valves (32 or 34mm intakes and stock exhaust size). The kit includes everything you will need. I can get you the kit at a good price and give you some advice. I have installed many of those kits.
Logged
Owner of the "Million Dollar CB"

Offline afkrejci90

  • Enthusiast
  • **
  • Posts: 192
Re: 78K Valvetrain
« Reply #2 on: August 17, 2012, 08:13:07 AM »
Ok I've found the same thing on dynoman for $925 with 34 intakes, can you get a better deal than that?
Logged
'78 CB750K http://forums.sohc4.net/index.php?topic=105327.0
'80 CB750C - Sold
'06 CBR600RR

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: 78K Valvetrain
« Reply #3 on: August 17, 2012, 10:21:35 AM »
Check your PM's
Logged
Owner of the "Million Dollar CB"
Pages: [1]   Go Up
« previous next »