« previous next »
Pages: [1]   Go Down

Author Topic: Valve cover breather tube source  (Read 1030 times)

0 Members and 1 Guest are viewing this topic.

Offline stueveone

  • Hot Shot
  • ***
  • Posts: 346
Valve cover breather tube source
« on: August 25, 2012, 07:20:32 PM »
Just got a package of this stuff for the valve cover breather tube. Works great an is long enough when routing all the way down to the hose collector washer at the back of the motor.  It's perfect....
Logged

bollingball

  • Guest
Re: Valve cover breather tube source
« Reply #1 on: August 25, 2012, 08:33:00 PM »
 What could not turn the package on its side?
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,938
  • Bought her new 4/75
Re: Valve cover breather tube source
« Reply #2 on: August 26, 2012, 09:47:12 AM »
Great tip. Guess Ken isn't using a laptop  ;)
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline killersoundz

  • Hot Shot
  • ***
  • Posts: 608
Re: Valve cover breather tube source
« Reply #3 on: August 26, 2012, 09:56:25 AM »
Hey while on the subject. I haven't had a valve cover breather tube hooked up on my bike since I got it back together. Where is it supposed to go?
Logged
My project thread:

http://forums.sohc4.net/index.php?topic=107447.0

My CB750K4 Starting up for the first time after a seized motor and rebuild!

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,715
Re: Valve cover breather tube source
« Reply #4 on: August 26, 2012, 10:10:37 AM »
Here is the photo of a package of 3/8 inch radiator overflow tubing.
It was a thumbnail PSD. cannot be enlarged.
Largest file size for a small photo.
If the OP had clicked on the thumbnail photo we could have got a larger version then he could just drag the larger version to the desktop and send it to us right side up.

OK...This forum program does not allow PSD files.
The thumb nail had a constraint on it and did not allow conversion to a JPG. So I will have to go back and chose another file type that is acceptable .

BUT wait..... IT is just a package of 3/8 radiator tubing. No need to do anything else.

Logged

Offline stueveone

  • Hot Shot
  • ***
  • Posts: 346
Re: Valve cover breather tube source
« Reply #5 on: August 26, 2012, 11:57:19 AM »
Are your necks broken?!!! Sheesh.... ;)
Logged

Offline brewsky

  • Expert
  • ****
  • Posts: 1,110
Re: Valve cover breather tube source
« Reply #6 on: August 26, 2012, 12:01:13 PM »
Wonder if it is an oil resistant rubber compound?
Logged
66 CA77
78 550K
78 CB750K
02 FZ1
09 GL 1800

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,715
Re: Valve cover breather tube source
« Reply #7 on: August 26, 2012, 02:45:30 PM »
Quote from: stueveone on August 26, 2012, 11:57:19 AM
Are your necks broken?!!! Sheesh.... ;)

Good diagnosis! LOL..lol
Logged
Pages: [1]   Go Up
« previous next »