« previous next »
Pages: [1]   Go Down

Author Topic: CB350f Petcock  (Read 1291 times)

0 Members and 1 Guest are viewing this topic.

Offline Haji

  • Full Member
  • *
  • Posts: 9
CB350f Petcock
« on: August 29, 2012, 03:37:59 AM »
What universal petcock and adapter has anybody used on a 73 CB 350f?  I can't seem to find on I actually think fits on mine.  There are some on ebay that say they fit but appear to not be exact. 

Or if anyone has one for sale let me know!
Logged

Offline Round Dice

  • Full Member
  • *
  • Posts: 31
Re: CB350f Petcock
« Reply #1 on: August 29, 2012, 02:06:24 PM »
I needed one for my cb750 and it was impossible to find an exact match.  Luckily the threads on the tank are the same across the board for most all cbs.  Differences will be number of outlets, angle of outlet(s), and style of valve handle.  If you're not looking for an exact match, I would just get one that looks close and has a good return policy.  Again, most all threads on cb fuel tanks are the same. 
Logged
New to forums, not motorcycles.

Offline 78whiteorbs

  • Expert
  • ****
  • Posts: 1,418
Re: CB350f Petcock
« Reply #2 on: August 29, 2012, 03:53:58 PM »
pretty sure I have one - let me check
Logged

Offline Trevor from Warragul

  • Expert
  • ****
  • Posts: 1,089
Re: CB350f Petcock
« Reply #3 on: August 30, 2012, 12:04:33 AM »
Quote
What universal petcock and adapter has anybody used on a 73 CB 350f?

None - it's a unique fitting...  they appear on e-Bay occasionally

Trevor
Logged
1971 Kawasaki H1A
1972 Honda CB350F
1976 Moto Morini 3 1/2 Sport
1978 Honda CBX
1997 Suzuki Bandit 1200
1999 Ducati Monster 750

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: CB350f Petcock
« Reply #4 on: August 30, 2012, 06:26:32 AM »
Quote from: morini on August 30, 2012, 12:04:33 AM
Quote
What universal petcock and adapter has anybody used on a 73 CB 350f?

None - it's a unique fitting...  they appear on e-Bay occasionally

Trevor

+1.  No threaded bung on the 350F.  There are two phillips screws (and fibre washers) that go into the bottom of it.
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline vames

  • Expert
  • ****
  • Posts: 806
Re: CB350f Petcock
« Reply #5 on: August 30, 2012, 06:44:58 AM »
Seems like you could pretty easily fabricate something using a piece of flat maybe 1/4" thick x 2" long x 3/4" wide) aluminum, a drill press, a couple of taps, some fuel-resistant gasket material and an exacto, and some small plumbing fittings threaded to whatever size you need.

What it ultimately looks like depends on the petcock you're trying to fit.
Logged
Pages: [1]   Go Up
« previous next »