Well Guys
I have been hard at work , finalys split the motor to becays i had no compression on the 2 cylinders, when I split the motor i found that 2 valves where slightly bent. was also nice to see that the motor has never been opened.
So after a week of waiting for Honda sa to come back to me I sourced parts from the UK , its been 2 days and I got the notification that the parts are in south africa. awesome service. Dave Silver spares.
Took the Bike for a power wash
just letting her dry off before i start
Started on the hand sanding/cleaning and polishing of the motor, could years of rattle can black sticks like CR@%
all the valves out
the tank is pretty dented , no use tanking half measures took it down to bare metal.
After some body work, I will use the black for the second set of flatting to see for any minor dents I still need to work out. Does look tops flat black
Just some more inspiration
CAFE BRAT