« previous next »
Pages: [1] 2  All   Go Down

Author Topic: new paint job for the 550  (Read 4632 times)

0 Members and 1 Guest are viewing this topic.

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
new paint job for the 550
« on: September 23, 2012, 12:32:10 PM »
Just got my cb550 back together after new paint.
I had the bucket, side covers, seat pan and tank hydro dipped with a carbon fiber pattern. it was then cleared with flat clear coat. From a distance, it looks like a solid color until you get close and see the carbon fiber pattern. Think I'll leave this bike alone for a while and get back to my 750f project!





Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: new paint job for the 550
« Reply #1 on: September 23, 2012, 12:54:30 PM »
What's this dipping one speaks of?
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline luap

  • LAWL
  • Expert
  • ****
  • Posts: 779
Re: new paint job for the 550
« Reply #2 on: September 23, 2012, 12:56:59 PM »
damn thats cool. you can also get that look with the 3m protector
Logged
75-550 ffsc sold, 78-550 diamonte sold, 125s grasshopper sold, 76-550 puma sold, 78-550 tracker sold, 74-550 verde diablo Sold, 74-550 Noemani finished trying to sell. 72 500 hartail in the works
www.cb-town.com
"I dont need a bike covered in paint an chrome I know exactally bout how big my coc( is"

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
Re: new paint job for the 550
« Reply #3 on: September 23, 2012, 01:02:57 PM »
hydro dipping is a paint process that lays down a pattern on water. The part is then dipped into the pattern. I'm sure i'm simplifying this quite a bit but that is my understanding of the process.

Here is the local shop in Milwaukee I used.
Check out their wood grain boosa!

http://www.teamgileto.com

luap:
I wanted to do the 3m wrap but the guy I took the tank to said It would need to be seamed and didn't recommend it. The curves were too tight.
Logged

Offline PrsCustom22j

  • "they've done studies you know...60% of the time it works every time"
  • Full Member
  • *
  • Posts: 67
Re: new paint job for the 550
« Reply #4 on: September 23, 2012, 01:30:44 PM »
nice looking seat...where did you get it? 
Logged
1976 Honda CB550K

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
Re: new paint job for the 550
« Reply #5 on: September 23, 2012, 01:39:40 PM »
Quote from: PrsCustom22j on September 23, 2012, 01:30:44 PM
nice looking seat...where did you get it?

Omar's dirt bikes
http://omarsdtr.com
Logged

Offline Killer Canary

  • Master
  • *****
  • Posts: 1,805
  • Typical Bran Muffin
Re: new paint job for the 550
« Reply #6 on: September 23, 2012, 02:09:57 PM »
That is sharp! I love it.
Logged
If it's worth doing at all it's worth over-doing.
Honda MT250, CB400F, CB450K, CB550, GL500, CBR929
Kawi GPz900, H1

Offline sscardefield

  • Full Member
  • *
  • Posts: 39
    • CB Town - Just Rippin'
Re: new paint job for the 550
« Reply #7 on: September 23, 2012, 02:40:01 PM »
I dig it man, super clean. I actually have the 3M film on my tank, a piece about 5" tall where a typical tank protector would go (where your belt buckle hits the tank), and it's over both of my knee dents (seamless). I mention it just because my knee dents have a good size curve too them, and there was no issues whatsoever. In fact I remember them asking if I wanted to cover the entire tank. You can't see the film in the picture, but you can see the degree of the curves of the knee dents. Click the picture for a larger version.



Also, what seat are you running?
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,356
  • Central Texas
Re: new paint job for the 550
« Reply #8 on: September 23, 2012, 02:46:33 PM »
Wow - two great looking 550 cafes! Where have you guys been hiding these bikes, no project thread?
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
Re: new paint job for the 550
« Reply #9 on: September 23, 2012, 03:21:53 PM »
Quote from: Stev-o on September 23, 2012, 02:46:33 PM
Wow - two great looking 550 cafes! Where have you guys been hiding these bikes, no project thread?

Thanks!
No project thread, sorry...
I was in such a hurry to build the bike I had no time to do a thread! I had it done in three months start to finish. I did take many photos though. I did start one for my 750f project but have not worked on it all summer! That one will fire back up soon.

sscardefield:
That 3M wrap will really flex well from what I have seen and it is what I started out wanting to do. Its the really tight compound corners that my shop said would need to be seamed. If anyone has done an entire tank, side cover, seat pan or headlight bucket without seams, I would love to see pictures.
Logged

Offline sscardefield

  • Full Member
  • *
  • Posts: 39
    • CB Town - Just Rippin'
Re: new paint job for the 550
« Reply #10 on: September 23, 2012, 03:52:22 PM »
What seat are you running?
Logged

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
Re: new paint job for the 550
« Reply #11 on: September 23, 2012, 03:59:29 PM »
Quote from: sscardefield on September 23, 2012, 03:52:22 PM
What seat are you running?

Answered that question two up from your post.
Omar's dirt bikes. See link in other post.
Logged

Offline sscardefield

  • Full Member
  • *
  • Posts: 39
    • CB Town - Just Rippin'
Re: new paint job for the 550
« Reply #12 on: September 23, 2012, 04:11:12 PM »
#$%*, didn't even see that, sorry.
Logged

Offline mono

  • Definitely no
  • Expert
  • ****
  • Posts: 1,271
  • 1975 Honda CB550, 1978 CB750K (in progress)
Re: new paint job for the 550
« Reply #13 on: September 23, 2012, 04:27:34 PM »
That's a hot looking bike!  Great job.

Sent from my SPH-L710 using Tapatalk 2
Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: new paint job for the 550
« Reply #14 on: September 23, 2012, 06:22:33 PM »
Sweet looking paint scheme Dave!
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline mono

  • Definitely no
  • Expert
  • ****
  • Posts: 1,271
  • 1975 Honda CB550, 1978 CB750K (in progress)
Re: new paint job for the 550
« Reply #15 on: September 24, 2012, 06:46:02 AM »
so what's this 3M textured wrap that you guys are talking about?  anyone have a link?
Logged

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
Re: new paint job for the 550
« Reply #16 on: September 24, 2012, 10:12:21 AM »
Quote from: mono on September 24, 2012, 06:46:02 AM
so what's this 3M textured wrap that you guys are talking about?  anyone have a link?
3M makes a vinyl adhesive that outdoor display companies use on the side of trucks etc. It comes in many patterns and solid colors. I saw a race trailer wrapped in carbon fiber and it looked awesome. It can be stretched and radiused to a large degree but the company I went to did not want to do the bike parts. Too tight.
Logged

Offline mono

  • Definitely no
  • Expert
  • ****
  • Posts: 1,271
  • 1975 Honda CB550, 1978 CB750K (in progress)
Re: new paint job for the 550
« Reply #17 on: September 24, 2012, 11:34:08 AM »
awesome, i'll look into it.  i know what you're talking about now -- just didn't know that they made it with sweet carbon fiber pattern!  i'll look it up :)
Logged

Offline sixthwisconsin

  • With an 1855 Springfield, I'm a
  • Hot Shot
  • ***
  • Posts: 553
Re: new paint job for the 550
« Reply #18 on: September 24, 2012, 05:43:18 PM »
Quote from: Tews19 on September 23, 2012, 06:22:33 PM
Sweet looking paint scheme Dave!

Thanks Nick...
Two Wheel Tuesday at Culver's tomorrow?
The 550 will be there after I pick up the Connie 14 from service. Doing a 2000 mile run Oct 4 to 14th out to Virginia so need to get that bike in top running order.
Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: new paint job for the 550
« Reply #19 on: September 24, 2012, 07:59:48 PM »
Quote from: sixthwisconsin on September 24, 2012, 05:43:18 PM
Quote from: Tews19 on September 23, 2012, 06:22:33 PM
Sweet looking paint scheme Dave!

Thanks Nick...
Two Wheel Tuesday at Culver's tomorrow?
The 550 will be there after I pick up the Connie 14 from service. Doing a 2000 mile run Oct 4 to 14th out to Virginia so need to get that bike in top running order.

I wish but the wife is working tomorrow night. Fun with 4 kids at home..... :o :o :o :o
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,393
  • SOHC4 member # 2605
Re: new paint job for the 550
« Reply #20 on: September 24, 2012, 11:36:27 PM »
Some vinyls and plastics respond to heat by becoming more flexible to stretch or to shrink to handle concave surfaces better. Patterns get distorted by this and people with sharp eyes for detail can see this even in complex patterns. So, there are limits on the stretching or shrinking for patterned pieces.
Logged
David- back in the desert SW!

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: new paint job for the 550
« Reply #21 on: September 25, 2012, 01:06:42 AM »
Quote from: Stev-o on September 23, 2012, 02:46:33 PM
Wow - two great looking 550 cafes! Where have you guys been hiding these bikes, no project thread?

Any BOTM nominations yet?
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline rdp2provia

  • Full Member
  • *
  • Posts: 36
Re: new paint job for the 550
« Reply #22 on: September 25, 2012, 05:15:15 AM »
Looks Incredible! Nicely done!
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,356
  • Central Texas
Re: new paint job for the 550
« Reply #23 on: September 25, 2012, 05:53:03 AM »
Quote from: fiddy of industry on September 25, 2012, 01:06:42 AM
Quote from: Stev-o on September 23, 2012, 02:46:33 PM
Wow - two great looking 550 cafes! Where have you guys been hiding these bikes, no project thread?

Any BOTM nominations yet?

Not til Monday
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline the technological J

  • Master
  • *****
  • Posts: 2,490
  • deliciouso!
Re: new paint job for the 550
« Reply #24 on: September 25, 2012, 06:05:51 AM »
bike looks great.... if you had the front fender and forks done it would have an apocoliptic look to it like something outta terminator 3 or something... 
 the only thing that i would have done different is maybe a different pattern on the seat to break it up... but thats being nit picky.... seriously nice ride
Logged
70 KO...sold to fund the ST http://forums.sohc4.net/index.php?topic=88800.0(Alpha)
74 Kaw 250 Enduro http://forums.sohc4.net/index.php?topic=124278.0
K4 added to collection! http://forums.sohc4.net/index.php?topic=104784.0
78 750K... http://forums.sohc4.net/index.php?topic=60257.0 (Omega)sold to fund the K4
94 ST1100..Gone
72 750 K2 Stay tuned!
Pages: [1] 2  All   Go Up
« previous next »