Author Topic: XR600 (Read 32764 times)

Terry in Australia · « **Reply #50 on:** November 10, 2012, 11:56:15 PM »

Quote from: Retro Rocket on November 10, 2012, 03:09:46 PM

Quote from: Terry in Australia on November 10, 2012, 01:38:32 AM
I love that chicken wire baffle mate, what was that supposed to achieve?

To keep the chickens in Terry....sheesh.....

Well I suppose stuffing a chook in there would quieten it down Mick, but it's kind of cruel, nonetheless.

Flying J · « **Reply #51 on:** November 19, 2012, 10:22:38 PM »

http://www.bikeexif.com/honda-xr600#more-14669

Flying J · « **Reply #52 on:** November 20, 2012, 10:38:28 PM »

MILO · « **Reply #53 on:** November 30, 2012, 08:16:08 PM »

that last bike there is super sweet!

I might be wrong, but i think that's an australian dude's bike, he sold it on ebay here a while back.

It was an XR600 engine in a CB360 frame, the top engine mount lines up perfectly, and he made up the lower mounts, said he could lift the front off the ground in all gears i think

Flying J · « **Reply #54 on:** December 15, 2012, 11:07:37 AM »

MVI HONDA XaLaRa 660

Flying J · « **Reply #55 on:** January 10, 2013, 06:32:29 PM »

Here is a pic with the new FMF header and powercore 4 exhaust.

My rear shock is leaking so its going to need to be rebuilt. While that is getting done i will have the stator rewond at Baja designs.

Flying J · « **Reply #56 on:** January 14, 2013, 12:34:53 AM »

Almost done with the fork swap. I replaced the seals and fluid. I had a problem mounting the pickup for the speedometer so i made a small bracket for it to mount to. I still need 1 bolt for the caliper. I am thinking about going black on the fork guards, headlight and fenders when i buy new ones so in the mean time i painted these to see how it would look.

1843

Flying J · « **Reply #57 on:** January 14, 2013, 03:51:49 PM »

Sourced a new bolt for the front caliper and rerouted the brake line. Put on a different wheel with a matching street tire. I found that with the 2 wheels i got for the front came with different length axles as well as different spacers. After some measuring I think i have the correct spacer and axle combo. These forks feel much stiffer then the XR forks. So here it is done for now.