Author Topic: 750 CamShaft tolerances  (Read 715 times)

0 Members and 1 Guest are viewing this topic.

Offline 7fifty4

  • Full Member
  • *
  • Posts: 52
750 CamShaft tolerances
« on: July 24, 2013, 06:59:27 pm »
I am looking for tolerances, for a K2 and K6, camshaft - if they are not the same.

The manual ( I have) read that the intake and outlet lobe of the camshaft should have certain measurements, right? Like 35. and 38.mm, I have not got the manual in front of me so I can not give the exact measurement, I understand it is NOT 35 and 38.mm exactly.

What I am after tho - which is not mentioned - and I can not find in any source, is, "when is too little too much" - as in - when is a camshaft not possible to use anymore - when it is 0.2mm under the nominated size? or 0.3mm, or...

any hints be appreciated - I hope it is not a RTFM, page xx and I missed that page

thanks in advance
7fifty4
:)