what he said...
and now - you will figure out how to read your wiring diagram...if you don't have a manual - go and get one before you unhook everything in the bucket - i think in the FAQs you can download one???
the only way to do it is to find every wire in the diagram and plug them in one at a time and mark them off as you do it - use a colored ink so you can see which ones you've marked.
if you just start matching colors up you will do what i did which is hook up some of the extra wires that are always in there and then stuff will short out, or worse, the bike won't run at all and then you have to take EVERYTHING apart again...
