« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: Cut n Weld day ....  (Read 10619 times)

0 Members and 1 Guest are viewing this topic.

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #50 on: October 12, 2012, 03:29:35 PM »
If I thought I had the talent Id cut out sections and use my buddies English wheel to make the indents, but I dont, so I wont.
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline DustyRags

  • I'm not skilled, I'm just a
  • Hot Shot
  • ***
  • Posts: 720
  • Just try it and see what happens
Re: Cut n Weld day ....
« Reply #51 on: October 12, 2012, 03:46:04 PM »
I, for one, look forward to the crazy beast you're building. I'm with you on the age thing- my bike was made 6 years before I was born. I'm sure I'll have my own quirks about things when I'm older (don't you DARE cut up that AWESOME Toyota shortbed! They run for ever!) but there are enough cherries out there that the occasional hack job won't ruin much.

Keep posting, I love this stuff!
Logged
1976 CB550K- sold
2005 Kawasaki Vulcan 500- sold
2000 CB750 Nighthawk - sold
1975 XL350 - crashed
2004 Suzuki Vstrom 650 - sold

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #52 on: October 12, 2012, 04:31:56 PM »
I cant decide between john deere blitz black, gloss black, or gloss red for the frame.  Since i plan on keeping all the rear framework exposed I think it will be an important decision...
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline Bluegreen

  • Hot Shot
  • ***
  • Posts: 396
Re: Cut n Weld day ....
« Reply #53 on: October 12, 2012, 05:32:52 PM »
Quote from: lucky on October 11, 2012, 08:25:36 AM
Quote from: WarwickE36 on October 10, 2012, 03:33:22 PM
And we have our first hater, I want it because all the old timers will hate it.

Hater???/  It does NOT have to have stock exhaust but just not up high for this particular engine. Most of the bikes that have high exhausts in the rear was for a very good reason. They had V4 engines OR V twin engines and the rear cylinder exited the rear because IT MADE SENSE.

Not really . I just am trying to save you a lot of hell.
Carry on floppy ears!!  LOL.lol

BTW.... some old timers have some information that is very helpful.
If you listen to some old timers you may save time ,money, pain and frustration.
Also OUR generation got you all the modern luxuries you now enjoy. We got us to the moon. WE made the airplanes, We made the trains, We built the freeway system. We made the first phones that worked perfect and clear as a Bell.

Are you trying to say the the generation that went to the moon is the same generation that invented the airplane?

I'm not sure what generation you're referring to but while you're at it you may as well add Planet Starbucks, overpackaging, the Gremlin, McDonalds, modern advertising, infomercials, credit cards, sitcoms,DDT, agent orange, Enron...

Are you taking credit for all of that as well? Get off the soap box, we need the wood.


Warwick, I'm excited to see how this turns out.
« Last Edit: October 12, 2012, 05:42:06 PM by Bluegreen »
Logged

Offline mono

  • Definitely no
  • Expert
  • ****
  • Posts: 1,271
  • 1975 Honda CB550, 1978 CB750K (in progress)
Re: Cut n Weld day ....
« Reply #54 on: October 12, 2012, 05:53:31 PM »
Dude i just decided today that i want to restore a Gremlin.   Saw one in a junkyard as a kid and fell in love instantly.   Lol

Sent from my SPH-L710 using Tapatalk 2

Logged

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #55 on: October 12, 2012, 06:08:59 PM »
Ive toyed with restoring a VW thing, a guy who works in my building just built a sick VW baja Bug
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Cut n Weld day ....
« Reply #56 on: October 12, 2012, 06:20:17 PM »
 I think the CL may have had a different cam than CB, to make more torque, less HP... could be wrong.. but who cares anyway?
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #57 on: October 12, 2012, 06:32:11 PM »
I only used the frame from the CL...

not sure where you were going with that 754.  Interesting though I thought all the motor goodies were the same and only the exhausts and some suspension bits were different between the cl and CB.
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline Bluegreen

  • Hot Shot
  • ***
  • Posts: 396
Re: Cut n Weld day ....
« Reply #58 on: October 12, 2012, 07:19:14 PM »
Quote from: WarwickE36 on October 12, 2012, 06:32:11 PM
I only used the frame from the CL...

not sure where you were going with that 754.  Interesting though I thought all the motor goodies were the same and only the exhausts and some suspension bits were different between the cl and CB.

I think it was in refernce to Lucky saying the CL was down a couple of HP to the CB.
Logged

Offline 750resurrection

  • Hot Shot
  • ***
  • Posts: 288
Re: Cut n Weld day ....
« Reply #59 on: October 12, 2012, 07:25:09 PM »
Quote from: DustyRags on October 12, 2012, 03:46:04 PM
I, for one, look forward to the crazy beast you're building. I'm with you on the age thing- my bike was made 6 years before I was born. I'm sure I'll have my own quirks about things when I'm older (don't you DARE cut up that AWESOME Toyota shortbed! They run for ever!) but there are enough cherries out there that the occasional hack job won't ruin much.

Keep posting, I love this stuff!

" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

 That means all owners are under their threat. They think it's very cool that their estrogen levels reach an unbearable monthly proportion on a continuous basis, it shows off how into it they are, it makes them somebody.

 Just hand them some midol and if they even think about telling you what to do it's falcon punch time.  ;D
« Last Edit: October 12, 2012, 07:32:34 PM by 750resurrection »
Logged

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #60 on: October 12, 2012, 07:34:17 PM »
Oh, I gotcha 754... 60 percent of the time I forget everything lucky says 100 percent of the time... ?  who knows Im tired.

and to 750resurrection your coke rant just made my signature...good work
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline 750resurrection

  • Hot Shot
  • ***
  • Posts: 288
Re: Cut n Weld day ....
« Reply #61 on: October 12, 2012, 07:54:19 PM »
Quote from: WarwickE36 on October 11, 2012, 04:33:21 PM

Lastly, after re-reading my previous posts I felt like I portrayed an attitude that I didnt intend to.  My hater comments were meant to be funny but I dont think they came across that way. 

 No they came across as hilarious, and they also have a ring of truth in them. Sorry about the dog/sheep mix up maybe that's why I was laughing so hard it's a great avatar pic.

 Lucky was in his helpful mode when he first commented. Those with experience do that here, that's what makes it great.
 I've also noticed Lucky does some primo restoration on parts he sells at great prices I saw on the sell part of this forum a week ago, nothing to be sneezed at. The carb for instance was fully rebuilt and the price was extremely good.

 So hey if purists are so offended, so can owners be.  ;D

 

Logged

Offline DustyRags

  • I'm not skilled, I'm just a
  • Hot Shot
  • ***
  • Posts: 720
  • Just try it and see what happens
Re: Cut n Weld day ....
« Reply #62 on: October 12, 2012, 08:44:43 PM »
And lest we forget, it's the old timers and the purists who help us sorry asses out when we're sitting there puzzling how that stupid cam chain tensioner is supposed to fit. Takes all kinds- the purists to make 'em work, and the heretics to blaze new trails.

Next old bike I come across is going to be gutted and have the frame filled with car batteries and an electric motor. Then I shall paint it pink and orange and write HARDLEY DAVIDSON on one side and LOUD PIPES SAVE LIVES on the other just to piss people off.
Logged
1976 CB550K- sold
2005 Kawasaki Vulcan 500- sold
2000 CB750 Nighthawk - sold
1975 XL350 - crashed
2004 Suzuki Vstrom 650 - sold

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,856
Re: Cut n Weld day ....
« Reply #63 on: October 12, 2012, 11:18:13 PM »
#$%* everyone...there are plenty of mass produced #$%* boxes for your faggot ass to rape...good things are not made any more...go ahead ruin some more junk...suck it #$%*...if your bull#$%* actually works goood(I doubt it)....this #$%* IS NOT MADE ANYMORE...yes, I just yelled at you
Logged
If it works good, it looks good...

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,856
Re: Cut n Weld day ....
« Reply #64 on: October 12, 2012, 11:25:44 PM »
there ya go...just what you wanted any way :) :o
Logged
If it works good, it looks good...

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,335
  • So, what do ya wanna talk about today?
Re: Cut n Weld day ....
« Reply #65 on: October 13, 2012, 01:47:02 AM »
Geez, don't get too excited SB, it's only a horrible old Honda twin, any mods would have to be an improvement! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,856
Re: Cut n Weld day ....
« Reply #66 on: October 13, 2012, 08:35:23 AM »
Quote from: seanbarney41 on October 12, 2012, 11:18:13 PM
#$%* everyone...there are plenty of mass produced #$%* boxes for your faggot ass to rape...good things are not made any more...go ahead ruin some more junk...suck it #$%*...if your bull#$%* actually works goood(I doubt it)....this #$%* IS NOT MADE ANYMORE...yes, I just yelled at you
yeah Terry...gotta stop posting when I get home from the bar...there is a huge moped rally in my town right now and these hipster mopeders were crowding up my favorite watering hole...I'm alright now...twin?, I thought this thing was a cb550?...

edit; I now see the single downtube, front drum, etc.
« Last Edit: October 13, 2012, 08:39:23 AM by seanbarney41 »
Logged
If it works good, it looks good...

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #67 on: October 13, 2012, 08:40:53 AM »
Nope this one is a 350, I haven't added it to my signature.  My last build was a 550.  If you look at the frame its got that ugly backbone the 550's lack.  I toyed with the idea of removing it and using a modern swing arm and front end but in the end I wanted to keep some of the vintage look, and it all seemed like way too much work for something that makes 35hp. 

I hate you, and only you! (Playa Haters Ball)

hate hate hate
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline Raul CB750K1

  • Old Timer
  • ******
  • Posts: 3,881
Re: Cut n Weld day ....
« Reply #68 on: October 13, 2012, 08:44:13 AM »
The more I look at the picture of the modifications, the louder a question rings in my head:

What does an open umbrella inside the shop serve for???
Logged

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Cut n Weld day ....
« Reply #69 on: October 13, 2012, 08:49:44 AM »
haha, i noticed it after I took the pics.   I am the mechanic for a limousine company.  Our drivers are fond of leaving #$%* laying around in odd places.  Im surprised there isnt a penis straw or boobie tassels laying around in some of the pics. 
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline 750resurrection

  • Hot Shot
  • ***
  • Posts: 288
Re: Cut n Weld day ....
« Reply #70 on: October 13, 2012, 10:18:11 AM »

Hey boobie tassles would go well on the end of the handlebars, and whatever a penis straw is sounds like a good carb air pressure tube.

 Not saying a porn bike would piss off the old timers... ;D
Logged

Offline Bluegreen

  • Hot Shot
  • ***
  • Posts: 396
Re: Cut n Weld day ....
« Reply #71 on: October 13, 2012, 11:14:06 AM »
Quote from: seanbarney41 on October 12, 2012, 11:18:13 PM
#$%* everyone...there are plenty of mass produced #$%* boxes for your faggot ass to rape...good things are not made any more...go ahead ruin some more junk...suck it #$%*...if your bull#$%* actually works goood(I doubt it)....this #$%* IS NOT MADE ANYMORE...yes, I just yelled at you

lol these are massed produced @#$% boxes, I love them, but c'mon.

You ever see people taking a cutting torch to a Lamborgini or Bugatti ?
Logged

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,856
Re: Cut n Weld day ....
« Reply #72 on: October 13, 2012, 11:31:56 AM »
sarcasm+alcohol+internet=fail
Logged
If it works good, it looks good...

Offline Bluegreen

  • Hot Shot
  • ***
  • Posts: 396
Re: Cut n Weld day ....
« Reply #73 on: October 13, 2012, 11:42:26 AM »
Quote from: seanbarney41 on October 13, 2012, 11:31:56 AM
sarcasm+alcohol+internet=fail

My bad

Sorry I get a little twitchy sometimes on here  ;D
Logged

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,856
Re: Cut n Weld day ....
« Reply #74 on: October 13, 2012, 11:55:19 AM »
Hey Warwick, I just got a funny idea that I'll post just to make up for my foul mouthed hater hatin' rude pseudo sarcasticness...ever seen a tz750?...how about one pipe in the more traditional location and one pipe under the seat?  I love the assymetrical look of the tz with pipes sticking out all over the place...
Logged
If it works good, it looks good...
Pages: 1 2 [3] 4   Go Up
« previous next »