Author Topic: Pingel petcock adapter..... (Read 5103 times)

MRieck · « **on:** October 20, 2012, 03:18:33 PM »

The adapter Pingel sells is the wrong thread pitch for mt 75 F tank so my good friend made this one up.

MRieck · « **Reply #1 on:** October 20, 2012, 03:25:31 PM »

Anybody interested in this? It works with the RS-34 carbs.....not sure about clearance with CR's.

Retro Rocket · « **Reply #2 on:** October 20, 2012, 03:46:48 PM »

Subscribed....

fang · « **Reply #3 on:** December 07, 2012, 11:20:29 AM »

I recently bought one of those Pingles. Infact, I think I might have two or three, new, still sitting in their boxes.... I really ought to get them out and check for fit. One is for an alloy CR tank.

Bill/BentON Racing · « **Reply #4 on:** December 08, 2012, 02:06:49 PM »

Mike,I'll take one please,Thanks,Bill

Jim F · « **Reply #5 on:** December 08, 2012, 03:25:36 PM »

Nice work Mike

754 · « **Reply #6 on:** December 08, 2012, 08:01:56 PM »

Someone on here said they don't flow enough, the Pingel that is, so thought I should mention they have a 3/8 model now..

Doctor_D · « **Reply #7 on:** December 08, 2012, 08:45:46 PM »

Not sure how I missed this thread, but yes, Mike, I'd like one too.

MRieck · « **Reply #8 on:** December 09, 2012, 06:01:32 AM »

Let me see what I can do...my buddy is extremely busy at the moment. I'd like to get a dozen made. It works perfect with the F model and RS carbs.

Bill/BentON Racing · « **Reply #9 on:** December 09, 2012, 06:21:42 AM »

Damn,it comes with RS carbs! WOW,I'll take 2!!!!!!

Bill

754 · « **Reply #10 on:** December 09, 2012, 08:20:19 AM »

If He can't make them,I can make some up. Doing a tricky one right now, For an Srx, 9/16 thick with hose barbs on the side, all one piece..

MRieck · « **Reply #11 on:** December 09, 2012, 09:44:25 AM »

Quote from: 754 on December 09, 2012, 08:20:19 AM

If He can't make them,I can make some up. Doing a tricky one right now, For an Srx, 9/16 thick with hose barbs on the side, all one piece..

That's OK with me Frank as he is up to his ears making suspension parts.

754 · « **Reply #12 on:** December 09, 2012, 06:10:01 PM »

Is it the same thread as a 77/78 K tank, that is all I have for a sample..

Doctor_D · « **Reply #13 on:** April 17, 2013, 05:12:45 PM »

So, what was the outcome here? Frank, Mike?

Bill/BentON Racing · « **Reply #14 on:** April 17, 2013, 05:57:44 PM »

Yes, still need one or two, reminds me theres a Pingle on the 77, 78K tank, I'll check, Bill

dragracer · « **Reply #15 on:** April 17, 2013, 06:26:32 PM »

Quote from: Bill/BentON Racing on April 17, 2013, 05:57:44 PM

Yes, still need one or two, reminds me theres a Pingle on the 77, 78K tank, I'll check, Bill

I definitely need one for my 78 F model. I've got 36mm flatslides on it now and the stock petcock is starving it on the big end.

dragracer · « **Reply #16 on:** April 17, 2013, 06:27:51 PM »

Quote from: MRieck on October 20, 2012, 03:25:31 PM

Anybody interested in this? It works with the RS-34 carbs.....not sure about clearance with CR's.

Mike,

Add me to the list for my 78F model. I plan to use the dual outlet Pingel.

754 · « **Reply #17 on:** April 17, 2013, 07:55:16 PM »

Are they 77/78 tank thread to. 3/8 npt?

MRieck · « **Reply #18 on:** April 18, 2013, 07:11:13 AM »

Quote from: dragracer on April 17, 2013, 06:27:51 PM

Quote from: MRieck on October 20, 2012, 03:25:31 PM
Anybody interested in this? It works with the RS-34 carbs.....not sure about clearance with CR's.

Mike,

Add me to the list for my 78F model. I plan to use the dual outlet Pingel.

Frank...I believe the adapter Pingel sells will work on the 77/78F2 tank as the bung is smaller than on the early F. I believe the late F bung is the same size as on the CBX.

754 · « **Reply #19 on:** April 18, 2013, 07:34:56 AM »

The only thing I got here for fitting/ measuring is a 77 /78 K tank.

knowsnothing · « **Reply #20 on:** April 18, 2013, 09:03:37 AM »

Quote from: 754 on April 18, 2013, 07:34:56 AM

The only thing I got here for fitting/ measuring is a 77 /78 K tank.

Hey Frank, how much would one of those adapters cost to have made for the 77/78k tank?

754 · « **Reply #21 on:** April 18, 2013, 03:26:30 PM »

I am looking into it, not sure if there are 2 styles maybe needed.

Bill/BentON Racing · « **Reply #22 on:** April 19, 2013, 04:48:38 PM »

Pingel on 77-78 K tank.

Tank available!

Bill

News:

Author Topic: Pingel petcock adapter..... (Read 5103 times)