« previous next »
Pages: [1]   Go Down

Author Topic: Where to get needle jets for 76 CB750F?  (Read 1406 times)

0 Members and 2 Guests are viewing this topic.

Offline BuffaloBill

  • Full Member
  • *
  • Posts: 67
Where to get needle jets for 76 CB750F?
« on: October 21, 2012, 07:20:55 PM »
The hole in my needle jets are worn visibly somewhat oval shaped.  I find on the Honda parts sites that these have been discontinued.  I just bought this bike and am going through the carbs. 

A discusion I found using search talked about needle and needle jet wear becoming bad enough to warrant replacement after 30-40k miles. This bike only has 11k miles (I know the owner, the odometer reading is correct).  My needles look fine I think; I'll look closer at them under the microscope at work. But the oval shaped hole in the needle jet I can see.

Is there a place to find real Honda needle jets?  Or are there good after market parts?

Thank you in advance,
Bill
Logged

Offline david 750f

  • Expert
  • ****
  • Posts: 827
  • 1976 CB750F
Re: Where to get needle jets for 76 CB750F?
« Reply #1 on: October 21, 2012, 10:18:02 PM »
BuffaloBill,
the needle and seat is still available from Honda, part #16012-392-004..

The discontinued part that Honda calls the "Needle Jet holder" is actually the emulsion tube that the main jet screws into.

Yamiya still sells the elusive Needle jet holder.  :)

http://www.yamiya750.com/index.php?main_page=product_info&cPath=21_143&products_id=659
« Last Edit: October 21, 2012, 10:34:36 PM by david 750F »
Logged
1976 CB 750F

Offline BuffaloBill

  • Full Member
  • *
  • Posts: 67
Re: Where to get needle jets for 76 CB750F?
« Reply #2 on: October 22, 2012, 04:06:32 AM »
Quote from: david 750F on October 21, 2012, 10:18:02 PM
BuffaloBill,
the needle and seat is still available from Honda, part #16012-392-004..

The discontinued part that Honda calls the "Needle Jet holder" is actually the emulsion tube that the main jet screws into.

Yamiya still sells the elusive Needle jet holder.  :)

http://www.yamiya750.com/index.php?main_page=product_info&cPath=21_143&products_id=659

Thanks, but I'm not talking about the float valve.  I mean part #3 on hondapartsdirect parts schematic, under carburetor, for a 76 CB750F. 

Bill
Logged

Offline david 750f

  • Expert
  • ****
  • Posts: 827
  • 1976 CB750F
Re: Where to get needle jets for 76 CB750F?
« Reply #3 on: October 22, 2012, 04:23:17 AM »
Thats the correct part number for the needle and seat.
It was still available at my local Honda dealer a few weeks ago.
Motogrid still lists it as available.

http://www.motogrid.com/pages/oemparts?aribrand=HOM#/Honda/CB750F_A_(76)_MOTORCYCLE%2c_JPN%2c_VIN%23_CB750F-2000003_TO_CB750F-2022317/CARBURETOR/CB750F-76-JPN-A/2Y133920E13392018A
Logged
1976 CB 750F

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,934
  • Bought her new 4/75
Re: Where to get needle jets for 76 CB750F?
« Reply #4 on: October 22, 2012, 09:30:19 AM »
FYI - IF a dealer has them and you need them you better buy them! From ServiceHonda.com

  Parts Search Results 
 
 
QUANTITY PART CATEGORY RETAIL  YOUR PRICE 
       NEEDLE SET, JET
(16012-392-004 )  Motorcycles  DISCONTINUED
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline BuffaloBill

  • Full Member
  • *
  • Posts: 67
Re: Where to get needle jets for 76 CB750F?
« Reply #5 on: October 22, 2012, 10:34:21 AM »
Quote from: david 750F on October 22, 2012, 04:23:17 AM
That's the correct part number for the needle and seat.
It was still available at my local Honda dealer a few weeks ago.
Motogrid still lists it as available.

http://www.motogrid.com/pages/oemparts?aribrand=HOM#/Honda/CB750F_A_(76)_MOTORCYCLE%2c_JPN%2c_VIN%23_CB750F-2000003_TO_CB750F-2022317/CARBURETOR/CB750F-76-JPN-A/2Y133920E13392018A

Thank you David!  I jumped to the wrong conclusion when you said "needle and seat".  I used the link you posted and ordered them!  I hope they actually do have the parts in stock.  They make good money on shipping.....$18.94 was their cheapest option.  But I'll just be happy to get them.  Service Honda and Honda Parts Direct show it to be discontinued.

Bill
Logged

Offline BuffaloBill

  • Full Member
  • *
  • Posts: 67
Re: Where to get needle jets for 76 CB750F?
« Reply #6 on: October 22, 2012, 10:37:45 AM »
Quote from: Jerry Rxman Griffin on October 22, 2012, 09:30:19 AM
FYI - IF a dealer has them and you need them you better buy them! From ServiceHonda.com

  Parts Search Results 
 
 
QUANTITY PART CATEGORY RETAIL  YOUR PRICE 
       NEEDLE SET, JET
(16012-392-004 )  Motorcycles  DISCONTINUED

That's a terrible word "DISCONTINUED" isn't it Jerry!
Logged
Pages: [1]   Go Up
« previous next »