Hello guys its been a while the cafe racer is all but finished but... hope you can assist me ive been searching the web for assistance on how to set up my Carbs, Ive been out for a run today for about half an hour, on returning back to the house i was looking over the bike and spotted that cylinders 3+4 seemed to be hotter than 1+2, so much so that the exhaust headers on 3+4 had a nice blue tinge to them and 1+2 where still gleaming stainless steel.... but after carrying out a very quick touch test number 2 cylinder was so cold that i could keep my finger on the header after just 3 min's of the bike being shut down.... where as the other pipes were still to hot to touch....i removed the spark plugs and number 2 was quite white compared to the other plugs which were wet and black, so i swapped the plugs around and number 2 is still the same..
so i can only think its a carb problem but the manual i have does not cover the PD46A carbs... i need information on all the measurements and settings to restore factory setting so i can begin from scratch, at the moment im running the bike with a MAC 4-1 and individual air filters .. help would be greatly appreciated.
cheers JD
