« previous next »
Pages: [1]   Go Down

Author Topic: Will the Dynoman 592 pistons work with a CB650 cam  (Read 1172 times)

0 Members and 1 Guest are viewing this topic.

Offline akabek

  • Hot Shot
  • ***
  • Posts: 303
Will the Dynoman 592 pistons work with a CB650 cam
« on: November 12, 2012, 12:33:37 pm »
I just ordered the Dynoman Street DP592/SV pistons and I was planning to use a CB650 cam.  Will this work or should I be looking at the Dynoman 58A cam?
Logged

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Will the Dynoman 592 pistons work with a CB650 cam
« Reply #1 on: November 12, 2012, 02:46:03 pm »
I don't think there's much difference between those cams so likely no problem, but you should always pre-assemble to check clearances anyway.
Logged
Pages: [1]   Go Up
« previous next »