« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: CB 100 Tinker Toy  (Read 9060 times)

0 Members and 1 Guest are viewing this topic.

Offline Killer Canary

  • Master
  • *****
  • Posts: 1,805
  • Typical Bran Muffin
Re: CB 100 Tinker Toy
« Reply #50 on: July 01, 2015, 11:17:56 AM »
Replace! Now you know that you can do it.
Logged
If it's worth doing at all it's worth over-doing.
Honda MT250, CB400F, CB450K, CB550, GL500, CBR929
Kawi GPz900, H1

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #51 on: July 01, 2015, 11:24:52 AM »
Yep............................will do.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: CB 100 Tinker Toy
« Reply #52 on: July 01, 2015, 08:20:11 PM »
Congrats and sympathy simultaneous...Larry
Logged

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #53 on: July 02, 2015, 04:05:11 AM »
Thanks momo........back to the drawing board.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #54 on: July 03, 2015, 06:52:35 AM »
Well, found a bolt that doesn't break when slightly over tightening.

Got a chance to kick it again, and it fires only with the choke fully on.

After starting, and turning the choke off, she revs way up, and kind of idles weird. Sorta pulsates, hi then low.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #55 on: July 03, 2015, 05:16:33 PM »
Well, ordered the sprocket and chain.

Got a kicker coming from a guy from another forum.

Still waiting for the wire harness, too.

Played with the kicker I have currently, and got it running again......played with the carb needles......think I screwed it up more.

Got it to idle on it's own. But, not sure if it's right or not, gotta wait till the stuff comes in, so I can ride it.

Don't want to let it idle too, too long. Don't want to overheat it.

With newly rebuilt engine, don't want to over throttle it either. So, guess I still have a ways to go.

Darn little thing bite me too. All these bikes I have and never have been burned by the exhaust, but this little booger got me.

Damit man......that hurts.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #56 on: July 09, 2015, 04:11:02 PM »
Got some new parts delivered today:

Chain

Front sprocket with retainer and bolts

Wire Harness
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #57 on: July 09, 2015, 04:21:54 PM »
I also have a few rear sprockets:

35

38

40

I know, I probably should have invested into a new rear sprocket along with the chain and front sprocket.........................

But, I didn't.....once I figure which one performs the best, then I'll buy a new one.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #58 on: July 11, 2015, 04:54:39 AM »
Well, in my excitement that I got a chain, and was able to push start this thing I made a big mistake.

I installed the chain, and didn't get the clip on good enough, and threw the darn thing.

Crapo, crap, crap.......................

BUTTTTTT.......I was able to ride up and down the street a few times, and she runs and rides.....dayyyyuuum, after 15 or 20 some odd years of resting up against a rotting shed.

I wish I could have gotten pics, and video.

I can't get the videos I have now of it running posted so, guess it doesn't matter.

Another thing too, I need to get the original shift lever, that has the heel side. Trying to get my toe up under the lever was tough. And a new brake pedal, or at least take mine off and bend it out some, cause it rubs the exhaust.

Geeesh, more parts on top of the parts I still need, and the list just keeps on growing.

But, I'm a happy camper, with where it's at, at the moment.

Guess, I can start playing with the 750 and try to get it back running again. (Carb issues)
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline Killer Canary

  • Master
  • *****
  • Posts: 1,805
  • Typical Bran Muffin
Re: CB 100 Tinker Toy
« Reply #59 on: July 11, 2015, 10:48:42 AM »
Damn fine job. :)
We're so committed here that sometimes I think some of us should be committed!
Logged
If it's worth doing at all it's worth over-doing.
Honda MT250, CB400F, CB450K, CB550, GL500, CBR929
Kawi GPz900, H1

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #60 on: July 11, 2015, 07:45:34 PM »
^^^^^^^^^^^ha ha ha ^^^^^^^^^^^

Ain't that the truth....!!!!!!!!!!
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #61 on: July 14, 2015, 12:57:13 AM »
Got another master link at the local Suzuki shop.

Made sure the clip was clipped, rode kinda shaky, guess I'm just not used to riding something that small.

I read the book on front fork oil and the book says to put the fluid in when you have them apart.

Well, I thought you put them together like I did the 750, and put the oil in.

Will it be ok to add the oil now, or do I need to tear the front end back down?

Other than that just kinda weird to be trying to ride something this small at 55 to 60 mph.

Work is 21 miles away, and there's one road that the speed limit is 55. And at 5 am in the morning there's crazies out there.

It does seem like it will be a fun bike to ride on occasion back and forth to work.

But, better yet, git the wife out on it.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,202
  • I love to restore & travel. Keep'em Going Strong !
Re: CB 100 Tinker Toy
« Reply #62 on: July 14, 2015, 01:57:43 AM »
Glad to hear you have'er on the road  :)
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #63 on: July 14, 2015, 02:38:30 AM »
Thanks......................


Well sorta.......................I was just able to ride it down to the end of the street and around the back yard w/o crashing or throwing chains, or parts.

I still need parts, such as, tank, seat, headlight assembly, rig up some sort of fork ears for that headlight.

Apparently, I'm gonna need a taillight assembly now, cause I can't find the one that was on the bike when I got it.

I may have trashed it when I first got it, cause I didn't figure I'd ever get this far with this little bike.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #64 on: July 16, 2015, 04:48:01 PM »
Because I had the cylinder bored to .50mm over the factory spec, will that have any affect on the carb, or any other timing issues?
« Last Edit: July 17, 2015, 10:06:21 AM by budlite282 »
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: CB 100 Tinker Toy
« Reply #65 on: July 16, 2015, 08:18:57 PM »
No timing effect, may have to go up a size on the mains.  Stock exhaust?...Larry
Logged

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #66 on: July 17, 2015, 02:52:51 AM »
Quote from: MoMo on July 16, 2015, 08:18:57 PM
No timing effect, may have to go up a size on the mains.  Stock exhaust?...Larry

yes, stock exhaust. New carb from florida. Doesn't have any markings on the jet to tell me what size.
« Last Edit: July 17, 2015, 10:06:38 AM by budlite282 »
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: CB 100 Tinker Toy
« Reply #67 on: July 17, 2015, 04:12:55 AM »
You should be fine as is
Logged

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #68 on: July 17, 2015, 10:08:39 AM »
Thanks MoMo...

Can't get this darn thing to stop pizzing gas.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: CB 100 Tinker Toy
« Reply #69 on: July 17, 2015, 06:38:08 PM »
Quote from: budlite282 on July 17, 2015, 10:08:39 AM
Thanks MoMo...

Can't get this darn thing to stop pizzing gas.




from the carb??
Logged

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #70 on: July 18, 2015, 05:22:03 AM »
Quote from: MoMo on July 17, 2015, 06:38:08 PM
Quote from: budlite282 on July 17, 2015, 10:08:39 AM
Thanks MoMo...

Can't get this darn thing to stop pizzing gas.




from the carb??


Yep, the overflow tube. I've pulled the carb and cleaned the float needle and valve.

I'm thinking of changing the bowl with my original and see it maybe the brass tube is split.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline Killer Canary

  • Master
  • *****
  • Posts: 1,805
  • Typical Bran Muffin
Re: CB 100 Tinker Toy
« Reply #71 on: July 18, 2015, 02:23:51 PM »
Just thought I'd mention that if you're having trouble finding 6v instrument bulbs, there are a lot of sellers on Ebay who provide LED replacements. I just got 10 for my MT250 for $6!
Bright,cool blue and very rarely need replacing.
Logged
If it's worth doing at all it's worth over-doing.
Honda MT250, CB400F, CB450K, CB550, GL500, CBR929
Kawi GPz900, H1

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #72 on: July 19, 2015, 07:05:24 AM »
Quote from: Killer Canary on July 18, 2015, 02:23:51 PM
Just thought I'd mention that if you're having trouble finding 6v instrument bulbs, there are a lot of sellers on Ebay who provide LED replacements. I just got 10 for my MT250 for $6!
Bright,cool blue and very rarely need replacing.

Cool.....

Got a link?
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline Killer Canary

  • Master
  • *****
  • Posts: 1,805
  • Typical Bran Muffin
Re: CB 100 Tinker Toy
« Reply #73 on: July 19, 2015, 07:42:03 AM »
.ebay.ca/itm/10pcs-T10-T11-6v-WHITE-BA9S-Led-Bulb-Light-Lamp-TW6-/171636559477?pt=LH_DefaultDomain_0&hash=item27f6560e75
Logged
If it's worth doing at all it's worth over-doing.
Honda MT250, CB400F, CB450K, CB550, GL500, CBR929
Kawi GPz900, H1

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,844
Re: CB 100 Tinker Toy
« Reply #74 on: July 19, 2015, 02:07:25 PM »
Quote from: Killer Canary on July 19, 2015, 07:42:03 AM
.ebay.ca/itm/10pcs-T10-T11-6v-WHITE-BA9S-Led-Bulb-Light-Lamp-TW6-/171636559477?pt=LH_DefaultDomain_0&hash=item27f6560e75

Didn't work, but I got a long way to go b4 I'll be needing any lights.

Can 't get the sum beech to run now......can't figure it out.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.
Pages: 1 2 [3] 4   Go Up
« previous next »