Knock on wood, she should be fine now as far as charging.
I had my doubts about the stator, but it charged with the jumper cable on regulator. I took out the rectifier and there was a small piece of insulation missing from the red output wire, I replaced that and it should be it, finally.
It was several issues:
- stator and coil leads had conductive connection somewhere before the big 8 plug
- one of the coil leads was basically broken
- one of the stator leadconnectors was pretty much rotten off
- output from rectifier had broken insulation
I learned a lot, hopefully all I need to do is to get new gaskets and seal shift cover and alternator for good.